November 26, 2020

Download Ebook Free Advances In Analog And RF IC Design For Wireless Communication Systems

Advances in Analog and RF IC Design for Wireless Communication Systems

Advances in Analog and RF IC Design for Wireless Communication Systems
Author : Gabriele Manganaro,Domine M W Leenaerts
Publisher : Academic Press
Release Date : 2013-05-13
Category : Technology & Engineering
Total pages :320
GET BOOK

Advances in Analog and RF IC Design for Wireless Communication Systems gives technical introductions to the latest and most significant topics in the area of circuit design of analog/RF ICs for wireless communication systems, emphasizing wireless infrastructure rather than handsets. The book ranges from very high performance circuits for complex wireless infrastructure systems to selected highly integrated systems for handsets and mobile devices. Coverage includes power amplifiers, low-noise amplifiers, modulators, analog-to-digital converters (ADCs) and digital-to-analog converters (DACs), and even single-chip radios. This book offers a quick grasp of emerging research topics in RF integrated circuit design and their potential applications, with brief introductions to key topics followed by references to specialist papers for further reading. All of the chapters, compiled by editors well known in their field, have been authored by renowned experts in the subject. Each includes a complete introduction, followed by the relevant most significant and recent results on the topic at hand. This book gives researchers in industry and universities a quick grasp of the most important developments in analog and RF integrated circuit design. Emerging research topics in RF IC design and its potential application Case studies and practical implementation examples Covers fundamental building blocks of a cellular base station system and satellite infrastructure Insights from the experts on the design and the technology trade-offs, the challenges and open questions they often face References to specialist papers for further reading

Advances in Analog and RF IC Design for Wireless Communication Systems

Advances in Analog and RF IC Design for Wireless Communication Systems
Author : Hooman Darabi
Publisher : Elsevier Inc. Chapters
Release Date : 2013-05-13
Category : Technology & Engineering
Total pages :320
GET BOOK

This chapter offers a system-level analysis of advanced RF transceivers intended for use in wireless and particularly mobile applications. An overview of RF cellular standards is presented, followed by a discussion of various radio architectures. The key radio requirements are derived, and translated to circuit specs, giving an overview of a practical top-down radio design. Several radio non-idealities resulting from RF CMOS shortcomings are discussed, and various architectural and calibration techniques are introduced to overcome those. We will also cover more advanced topics such as handset calibration, the evolution to broadband, RF diversity, and next-generation mobile standards and their requirements.

Advances in Analog and RF IC Design for Wireless Communication Systems

Advances in Analog and RF IC Design for Wireless Communication Systems
Author : Michael Elliott,Boris Murmann
Publisher : Elsevier Inc. Chapters
Release Date : 2013-05-13
Category : Technology & Engineering
Total pages :320
GET BOOK

This chapter provides an overview of design techniques and system aspects relevant to the application of high-speed pipelined ADCs in wireless base transceiver stations (BTS). The discussion begins with a derivation of typical ADC specifications for the receive path of a multi-carrier BTS system. Next, we investigate issues pertaining to the interface between the ADC and its driving circuitry, including complications that arise with sample-and-hold-amplifier-less (SHA-less) ADC frontends. Lastly, we summarize recent research results that look into the digital linearization of dynamic nonlinearities at the ADC’s frontend.

Advances in Analog and RF IC Design for Wireless Communication Systems

Advances in Analog and RF IC Design for Wireless Communication Systems
Author : Richard Schreier,Hajime Shibata
Publisher : Elsevier Inc. Chapters
Release Date : 2013-05-13
Category : Technology & Engineering
Total pages :320
GET BOOK

Design concepts and an example of bandpass Delta-Sigma ADCs for wireless receivers are described. Delta-Sigma ADC design involves a variety of choices in the system design phase, such as lowpass vs. bandpass loop filter or, feedback vs. feedforward architecture. In the first half of the chapter, such system decisions are compared and discussed in the context of wireless communication applications. The latter half of the Chapter describes an example bandpass Delta-Sigma ADC design based on the aforementioned discussions. Circuit implementations and measurement results are disclosed in details.

Advances in Analog and RF IC Design for Wireless Communication Systems

Advances in Analog and RF IC Design for Wireless Communication Systems
Author : Salvatore Levantino,Carlo Samori
Publisher : Elsevier Inc. Chapters
Release Date : 2013-05-13
Category : Technology & Engineering
Total pages :320
GET BOOK

In less than one decade after their introduction into radio-frequency applications, digital fractional-N phase-locked loops (PLLs) have become a relevant topic in microelectronic research and a practical solution for products. In addition to the well-known advantages, such as their silicon area occupation scaling as technology node and their easier portability to new nodes, digital PLLs enable easy and low-cost implementation of calibration techniques, which substantially reduce spurious tones and remove other major analog impairments. In wideband PLLs, the ultimate level of spur performance is often bounded by the time resolution and the linearity of the time-to-digital converter within the digital PLL. Methods for mitigating its nonlinearity such as those based on element randomization and large-scale dithering are discussed. The use of fractional-N dividers based on digital-to-time converters, as a means to relax the design of the time-to-digital converter, is also reviewed. This concept is extended to the limit case of a single-bit time-to-digital converter, which provides best PLL noise–power trade-off with good spur performance.

Advances in Analog and RF IC Design for Wireless Communication Systems

Advances in Analog and RF IC Design for Wireless Communication Systems
Author : Gil Engel,Gabriele Manganaro
Publisher : Elsevier Inc. Chapters
Release Date : 2013-05-13
Category : Technology & Engineering
Total pages :320
GET BOOK

This chapter discusses the practical application of RF digital-to-analog converters (RF DACs) to communication systems such as cable distribution, wireless communications infrastructure (WIFR) base stations, wireless backhaul, and other such systems. The key specifications that are driving the development of RF DAC technology are reviewed, as are some common radio architectures used to implement those systems. Challenges associated with the design of RF DACs are described, and some trade-offs and possible solutions are discussed. Design considerations of the package and the printed circuit board (PCB) design are reviewed. Measured results of an RF DAC suitable for cable head-end transmitters are presented. The features and performance of RF DACs provide an enabling solution for “Software Defined Radio” (SDR) systems targeted toward multi-carrier, multi-band, multi-standard radio transmitters.

Advances in Analog and RF IC Design for Wireless Communication Systems

Advances in Analog and RF IC Design for Wireless Communication Systems
Author : Michael H. Perrott
Publisher : Elsevier Inc. Chapters
Release Date : 2013-05-13
Category : Technology & Engineering
Total pages :320
GET BOOK

Time-to-digital converter (TDC) circuits are a key component for achieving high-performance digital phase-locked loops (PLLs) which offer lower area and greater flexibility than their analog PLL counterparts. This chapter focuses on a recently developed TDC architecture known as the gated ring oscillator (GRO) which offers first-order shaping of its quantization noise and delay stage mismatch. To provide context for the GRO discussion, background on general TDC implementation techniques is described along with key performance issues related to digital frequency synthesizers. The GRO concept is then presented, followed by implementation details and measured results. Finally, recent variations on the GRO concept are described such as a MASH TDC structure which achieves higher-order noise shaping and a switched ring oscillator (SRO) TDC which improves robustness to dead zones encountered by the GRO TDC.

Advances in Analog and RF IC Design for Wireless Communication Systems

Advances in Analog and RF IC Design for Wireless Communication Systems
Author : Kostas Doris,Erwin Janssen,Yu Lin,Athon Zanikopoulos,Alessandro Murroni
Publisher : Elsevier Inc. Chapters
Release Date : 2013-05-13
Category : Technology & Engineering
Total pages :320
GET BOOK

This paper reviews recent developments of interleaved Successive Approximation Analog-to-Digital converters (SAR) in deep sub-micron CMOS technologies. The discussion covers design tradeoffs and degrees of freedom related to the impact of extensive interleaving with many SAR units on bandwidth, noise, linearity, and spurious performance. The impact of interleaving mismatches on representative broadband and multi-carrier narrowband signals is also discussed. Next, two examples are given demonstrating how interleaving with many ADCs can be transformed from a weakness to a strength. The first example concerns low spurious performance enabled by redundant SAR converters and randomization of their operation. The second example presents spectral sensing techniques.

Advances in Monolithic Microwave Integrated Circuits for Wireless Systems: Modeling and Design Technologies

Advances in Monolithic Microwave Integrated Circuits for Wireless Systems: Modeling and Design Technologies
Author : Marzuki, Arjuna,Rahim, Ahmad Ismat Abdul,Loulou, Mourad
Publisher : IGI Global
Release Date : 2011-08-31
Category : Technology & Engineering
Total pages :380
GET BOOK

Monolithic Microwave Integrated Circuit (MMIC) is an electronic device that is widely used in all high frequency wireless systems. In developing MMIC as a product, understanding analysis and design techniques, modeling, measurement methodology, and current trends are essential.Advances in Monolithic Microwave Integrated Circuits for Wireless Systems: Modeling and Design Technologies is a central source of knowledge on MMIC development, containing research on theory, design, and practical approaches to integrated circuit devices. This book is of interest to researchers in industry and academia working in the areas of circuit design, integrated circuits, and RF and microwave, as well as anyone with an interest in monolithic wireless device development.

Design of High-speed Communication Circuits

Design of High-speed Communication Circuits
Author : Ramesh Harjani
Publisher : World Scientific
Release Date : 2006-01
Category : Technology & Engineering
Total pages :222
GET BOOK

MOS technology has rapidly become the de facto standard for mixed-signal integrated circuit design due to the high levels of integration possible as device geometries shrink to nanometer scales. The reduction in feature size means that the number of transistor and clock speeds have increased significantly. In fact, current day microprocessors contain hundreds of millions of transistors operating at multiple gigahertz. Furthermore, this reduction in feature size also has a significant impact on mixed-signal circuits. Due to the higher levels of integration, the majority of ASICs possesses some analog components. It has now become nearly mandatory to integrate both analog and digital circuits on the same substrate due to cost and power constraints. This book presents some of the newer problems and opportunities offered by the small device geometries and the high levels of integration that is now possible.The aim of this book is to summarize some of the most critical aspects of high-speed analog/RF communications circuits. Attention is focused on the impact of scaling, substrate noise, data converters, RF and wireless communication circuits and wireline communication circuits, including high-speed I/O.

Analog Circuit Design

Analog Circuit Design
Author : Michiel Steyaert,Arthur H.M. van Roermund,Johan Huijsing
Publisher : Springer Science & Business Media
Release Date : 2006-03-14
Category : Technology & Engineering
Total pages :403
GET BOOK

Analog Circuit Design contains the contribution of 18 tutorials of the 14th workshop on Advances in Analog Circuit Design. Each part discusses a specific todate topic on new and valuable design ideas in the area of analog circuit design. Each part is presented by six experts in that field and state of the art information is shared and overviewed. This book is number 14 in this successful series of Analog Circuit Design, providing valuable information and excellent overviews of analog circuit design, CAD and RF systems. Analog Circuit Design is an essential reference source for analog circuit designers and researchers wishing to keep abreast with the latest development in the field. The tutorial coverage also makes it suitable for use in an advanced design course.

High-Frequency Analog Integrated Circuit Design

High-Frequency Analog Integrated Circuit Design
Author : Ravender Goyal
Publisher : Wiley-Interscience
Release Date : 1995
Category : Technology & Engineering
Total pages :401
GET BOOK

The last few years have seen a number of important advances in manufacturing technology for GaAs MESFET-based IC processing. The newfound ability to apply silicon design techniques to reliable GaAs materials and devices represents a boon to the communications industry in which high-speed processing is of the essence. As a consequence, there is a growing demand for engineers fully versed in GaAs design technology. Yet, until now, there was no practical guide to designing for this breakthrough technology.

RF System Design of Transceivers for Wireless Communications

RF System Design of Transceivers for Wireless Communications
Author : Qizheng Gu
Publisher : Springer Science & Business Media
Release Date : 2006-05-03
Category : Technology & Engineering
Total pages :480
GET BOOK

This book is for RF Engineers and, in particular, those engineers focusing mostly on RF systems and RFIC design. The author develops systematic methods for RF systems design, complete with a comprehensive set of design formulas. Its focus on mobile station transmitter and receiver system design also applies to transceiver design of other wireless systems such as WLAN. This comprehensive reference work covers a wide range of topics from general principles of communication theory, as it applies to digital radio designs to specific examples on implementing multimode mobile systems.

Wireless Receiver Architectures and Design

Wireless Receiver Architectures and Design
Author : Tony J. Rouphael
Publisher : Academic Press
Release Date : 2014-06-17
Category : Technology & Engineering
Total pages :502
GET BOOK

Wireless Receiver Architectures and Design presents the various designs and architectures of wireless receivers in the context of modern multi-mode and multi-standard devices. This one-stop reference and guide to designing low-cost low-power multi-mode, multi-standard receivers treats analog and digital signal processing simultaneously, with equal detail given to the chosen architecture and modulating waveform. It provides a complete understanding of the receiver‘s analog front end and the digital backend, and how each affects the other. The book explains the design process in great detail, starting from an analysis of requirements to the choice of architecture and finally to the design and algorithm development. The advantages and disadvantages of each wireless architecture and the suitability to a standard are given, enabling a better choice of design methodology, receiver lineup, analog block, and digital algorithm for a particular architecture. Whether you are a communications engineer working in system architecture and waveform design, an RF engineer working on noise and linearity budget and line-up analysis, a DSP engineer working on algorithm development, or an analog or digital design engineer designing circuits for wireless transceivers, this book is your one-stop reference and guide to designing low-cost low-power multi-mode multi-standard receivers. The material in this book is organized and presented to lead you from applied theory to practical design with plenty of examples and case studies drawn from modern wireless standards. Provides a complete description of receiver architectures together with their pros and cons, enabling a better choice of design methodology Covers the design trade-offs and algorithms between the analog front end and the digital modem – enabling an end-to-end design approach Addresses multi-mode multi-standard low-cost, low-power radio design – critical for producing the applications for Smart phones and portable internet devices

Design of High Frequency Integrated Analogue Filters

Design of High Frequency Integrated Analogue Filters
Author : Yichuang Sun,Institution of Electrical Engineers
Publisher : IET
Release Date : 2002-01-01
Category : Technology & Engineering
Total pages :243
GET BOOK

This book brings together leading researchers to highlight recent advances and identify promising directions for future development. Motivated by the market for mobile and wireless communications, fully integrated analog filters for high-frequency applications are now receiving great interest world-wide. Chapters are dedicated to MOSFET-C and Gm-C filters, current-mode continuous-time filters, log-domain filters, switched-current filters, adaptive filters and on-chip automatic tuning. The topical nature of the book and caliber of the authors ensures that this book will be of wide interest to the electronics community world-wide.