January 22, 2021

Download Ebook Free Chipless RFID Reader Design For Ultra-Wideband Technology

Chipless RFID Reader Design for Ultra-Wideband Technology

Chipless RFID Reader Design for Ultra-Wideband Technology
Author : Marco Garbati,Etienne Perret,Romain Siragusa
Publisher : Elsevier
Release Date : 2018-06-25
Category : Technology & Engineering
Total pages :200
GET BOOK

Chipless RFID Reader Design for Ultra-Wideband Technology: Design, Realization and Characterization deals with the efficient design of Field Programmable Gate Array (FPGA) based embedded systems for chipless readers, providing a reading technique based on polarization diversity that is shown with the aim of reading cross-polarized, chipless tags independently from their orientation. This approach is valuable because it does not give any constraint at the tag design level. This book presents the state-of-the-art of chipless RFID systems, also providing useful comparisons. The international regulations that limit the UWB emission are taken into consideration, along with design guidance. Two designed, realized, and characterized reader prototypes are proposed. Sampling noise reduction, reading time, and cost effectiveness are also introduced and taken into consideration. Presents the design, realization and characterization of chipless RFID readers Provides concepts that are designed around a FPGA and its internal architecture, along with the phase of optimization Covers the design of a novel pulse generator

RFID and Wireless Sensors Using Ultra-Wideband Technology

RFID and Wireless Sensors Using Ultra-Wideband Technology
Author : Angel Ramos,Antonio Lazaro,David Girbau,Ramon Villarino
Publisher : Elsevier
Release Date : 2016-05-09
Category : Technology & Engineering
Total pages :266
GET BOOK

RFID and Wireless Sensors using Ultra-Wideband Technology explores how RFID-based technologies are becoming the first choice to realize the last (wireless) link in the chain between each element and the Internet due to their low cost and simplicity. Each day, more and more elements are being connected to the Internet of Things. In this book, ultra-wideband radio technology (in time domain) is exploited to realize this wireless link. Chipless, semi-passive and active RFID systems and wireless sensors and prototypes are proposed in terms of reader (setup and signal processing techniques) and tags (design, integration of sensors and performance). The authors include comprehensive theories, proposals of advanced techniques, and their implementation to help readers develop time-domain ultra-wideband radio technology for a variety of applications. This book is suitable for post-doctoral candidates, experienced researchers, and engineers developing RFID, tag antenna designs, chipless RFID, and sensor integration. Includes comprehensive theories, advanced techniques, and guidelines for their implementation to help readers develop time-domain ultra-wideband radio technology for a variety of applications Discusses ultra-wideband (UWB) technology in time-domain that is used to develop RFID systems and wireless sensors Explores the development of hipless, semi-passive, and active identification platforms in terms of low-cost readers and tags Integrates wireless sensors in the proposed chipless and semi-passive platforms

Multiresonator-Based Chipless RFID

Multiresonator-Based Chipless RFID
Author : Stevan Preradovic,Nemai Chandra Karmakar
Publisher : Springer Science & Business Media
Release Date : 2012-01-07
Category : Technology & Engineering
Total pages :172
GET BOOK

This vital new resource offers engineers and researchers a window on important new technology that will supersede the barcode and is destined to change the face of logistics and product data handling. In the last two decades, radio-frequency identification has grown fast, with accelerated take-up of RFID into the mainstream through its adoption by key users such as Wal-Mart, K-Mart and the US Department of Defense. RFID has many potential applications due to its flexibility, capability to operate out of line of sight, and its high data-carrying capacity. Yet despite optimistic projections of a market worth $25 billion by 2018, potential users are concerned about costs and investment returns. Clearly demonstrating the need for a fully printable chipless RFID tag as well as a powerful and efficient reader to assimilate the tag’s data, this book moves on to describe both. Introducing the general concepts in the field including technical data, it then describes how a chipless RFID tag can be made using a planar disc-loaded monopole antenna and an asymmetrical coupled spiral multi-resonator. The tag encodes data via the “spectral signature” technique and is now in its third-generation version with an ultra-wide band (UWB) reader operating at between 5 and 10.7GHz.

Chipless RFID based on RF Encoding Particle

Chipless RFID based on RF Encoding Particle
Author : Arnaud Vena,Etienne Perret,Smail Tedjini
Publisher : Elsevier
Release Date : 2016-08-21
Category : Technology & Engineering
Total pages :258
GET BOOK

Chipless RFID based on RF Encoding Particle: Realization, Coding and Reading System explores the field of chipless identification based on the RF Encoding Particle (REP). The book covers the possibility of collecting information remotely with RF waves (RFID) with totally passive tags without wire, batteries, and chips, and even printed on paper. Despite the many benefits of RFID, deployment is still hindered by several economic and technological factors. Among these barriers are the high cost of tags, lack of reliability and security in the information contained in the RFID chip, and how tags are 'recycled.' This book focuses on the development of chipless RFID tags, representing a new family of low cost tags. With this technology information is extracted from the electromagnetic response of the tag, which depends only on its geometry. Various solutions have been developed by the authors to increase the amount of information, reduce the surface of the tag, or improve the robustness of detection. Considerations such as realization using paper substrate, the development of a low cost detection system, and measurements in a real environment have been addressed for practical implementation. Introduces the chipless RFID REP approach as compared to classical chipless RFID, RFID, and barcode technologies Includes a demonstration of the practical and economic potential of chipless RFID technology, with detailed presentations and discussions of different test benches and comparisons Presents in detail numerous examples of chipless tags that are able to tackle specific problems: sensitivity of detection, encoding density, robustness of detection, problem of tag orientation, tags and reader cost, and compliance with emission standards Focuses on the development of chipless RFID tags, representing a new family of low cost tags

Chipless RFID Reader Architecture

Chipless RFID Reader Architecture
Author : Nemai Chandra Karmakar,Randika Koswatta,Prasanna Kalansuriya,Rubayet E-Azim
Publisher : Artech House
Release Date : 2013-08-01
Category : Technology & Engineering
Total pages :326
GET BOOK

In the era of information communication technology (ICT), radio frequency identification (RFID) has been going through tremendous development. RFID technology has the potential of replacing barcodes due to its large information carrying capacity, flexibility in operations, and applications. The deployment of RFID has been hindered by its cost. However, with the advent of low powered ICs, energy scavenging techniques, and low-cost chipless tags, RFID technology has achieved significant development. This book addresses the new reader architecture, presents fundamentals of chipless RFID systems, and covers protocols. It also presents proof-of-concept implementations with potential to replace trillions of barcodes per year. Overall, this resource aims to not only explain the technology, but to make the chipless RFID reader system a viable commercial product for mass deployment. It is certainly a very useful resource in the new field.

Microwave Sleep Apnoea Monitoring

Microwave Sleep Apnoea Monitoring
Author : Nemai Chandra Karmakar,Yang Yang,Abdur Rahim
Publisher : Springer
Release Date : 2017-12-21
Category : Technology & Engineering
Total pages :305
GET BOOK

This book presents the design, development and field trials of radio frequency based wireless monitoring system for sleep apnoea patients. It contains 4 major areas including general background of wireless monitoring technology and MIMO in wireless body area network (WBAN), microwave hardware designs, virtual MIMO in WBAN and hardware system level implementation and field trials. At components level, this book presents the design theory, process and examples of bandpass filters, lowpass filters, low profile patch antennas, power amplifiers and oscillators which are the key elements in transducer designs in the body area network and cooperative communication wireless sensor network system. At system level, this book features the hardware integration, field trial and network coding techniques. This book also gives a presentation of virtual MIMO applications, e.g. MIMO implementation using FPGA, correlation coefficient measurement. The book will create impact in the fields of wireless monitoring technology in biomedical engineering, which have been growing exponentially.

Chipless Radio Frequency Identification

Chipless Radio Frequency Identification
Author : Nemai Chandra Karmakar
Publisher : Wiley
Release Date : 2016-01-19
Category : Technology & Engineering
Total pages :272
GET BOOK

A chipless RFID (Radio Frequency Identification) tag does not use integrated circuit technology to store information, as is typical. Chipless RFID, which can be printed directly on products or packaging, will become the dominant RFID system in the near future, replacing bar codes. Written by the leading expert in the field, this book discusses the designs of various chipless RFID tags, a green technology that does not require batteries or a power source to streamline and improve merchandising industrial systems. A must-have guide for RFID researchers in academia and industry.

Chipless RFID System for Barcode Replacement

Chipless RFID System for Barcode Replacement
Author : Stevan Preradovic
Publisher : Unknown
Release Date : 2010
Category :
Total pages :231
GET BOOK

Radio Frequency Identification (RFID) is a modern wireless data transmission and reception technique for applications including automatic identification, asset tracking and security surveillance. As barcodes and other means of identification and asset tracking are inadequate for recent demands, RFID technology has attracted interest for applications such as logistics, supply chain management, asset tracking, and security access control. However, the cost of RFID limits their potential for the replacement of trillions of barcodes each year. The only possible solution is a fully printable chipless RFID tag.A novel RFID system comprised of a chipless RFID tag and an associated reader is reported in the thesis. The chipless tag is a fully-passive microwave circuit and uses spectral signatures for data encoding. The tag consists of a multi-resonator coupled to transmitting and receiving antennas. To accommodate multiple bits, the tag operates over the ultra wideband (UWB) frequency spectrum. UWB antennas are used to receive the interrogation signal sent from the reader and transmit the signal back to the reader after performing modulation of the frequency spectra with the multi-resonator. Modulation is performed in both amplitude and phase of the spectrum. A chipless tag up to 35 bits which operate over 3-7 GHz band has been designed.After the successful design of the chipless tag, three prototype readers have been developed. The Gen1 reader was designed to validate the chipless RFID concept using 6-bit chipless tag reading based on amplitude-only detection in S-band; the Gen2 reader is an upgraded version of Gen1 with both amplitude and phase detection capability; and the third generation reader is a UWB reader capable of reading up to 35-bits in the UWB band. The integrated reader is a complete system with analog RF and digital control sections loaded with graphical user interface (GUI) and software protocol. Both the hardware and software design of the RFID reader and field trials of the designed chipless RFID system have been validated in the real world environment. An investigation into antenna systems in order to enhance reading range up to 70 cm has also been performed.The unique features of the developed chipless RFID system are: (i) a low cost, fully printable tag and (ii) secure, remote and non-line-of-sight operability. The importance of this concept lies in the fact that chipless RFID tags become comparable to barcodes in terms of the substrate material used and the cost of fabrication. The main application of this chipless RFID system is in short-range tagging of extremely low cost items such as the Australian polymer banknote.

Chipless RFID Sensors

Chipless RFID Sensors
Author : Nemai Chandra Karmakar,Emran Md Amin,Jhantu Kumar Saha
Publisher : John Wiley & Sons
Release Date : 2016-02-23
Category : Technology & Engineering
Total pages :272
GET BOOK

"Providing a classification of smart materials based on sensing physical parameters (i.e. humidity, temperature, pH, gas, strain, light, etc.)"--

Handbook of Smart Antennas for RFID Systems

Handbook of Smart Antennas for RFID Systems
Author : Nemai Chandra Karmakar
Publisher : John Wiley & Sons
Release Date : 2011-02-25
Category : Technology & Engineering
Total pages :648
GET BOOK

The Handbook of Smart Antennas for RFID Systems is a single comprehensive reference on the smart antenna technologies applied to RFID. This book will provide a timely reference book for researchers and students in the areas of both smart antennas and RFID technologies. It is the first book to combine two of the most important wireless technologies together in one book. The handbook will feature chapters by leading experts in both academia and industry offering an in-depth description of terminologies and concepts related to smart antennas in various RFID systems applications. Some topics are: adaptive beamforming for RFID smart antennas, multiuser interference suppression in RFID tag reading, phased array antennas for RFID applications, smart antennas in wireless systems and market analysis and case studies of RFID smart antennas. This handbook will cover the latest achievements in the designs and applications for smart antennas for RFID as well as the basic concepts, terms, protocols, systems architectures and case studies in smart antennas for RFID readers and tags.

Microstrip and Printed Antennas

Microstrip and Printed Antennas
Author : Debatosh Guha,Yahia M.M. Antar
Publisher : John Wiley & Sons
Release Date : 2011-02-02
Category : Technology & Engineering
Total pages :504
GET BOOK

This book focuses on new techniques, analysis, applications and future trends of microstrip and printed antenna technologies, with particular emphasis to recent advances from the last decade Attention is given to fundamental concepts and techniques, their practical applications and the future scope of developments. Several topics, essayed as individual chapters include reconfigurable antenna, ultra-wideband (UWB) antenna, reflectarrays, antennas for RFID systems and also those for body area networks. Also included are antennas using metamaterials and defected ground structures (DGSs). Essential aspects including advanced design, analysis and optimization techniques based on the recent developments have also been addressed. Key Features: Addresses emerging hot topics of research and applications in microstrip and printed antennas Considers the fundamental concepts, techniques, applications and future scope of such technologies Discusses modern applications such as wireless base station to mobile handset, satellite earth station to airborne communication systems, radio frequency identification (RFID) to body area networks, etc. Contributions from highly regarded experts and pioneers from the US, Europe and Asia This book provides a reference for R&D researchers, professors, practicing engineers, and scientists working in these fields. Graduate students studying/working on related subjects will find this book as a comprehensive literature for understanding the present and future trends in microstrip and printed antennas.

Radio Frequency Identification and Sensors

Radio Frequency Identification and Sensors
Author : Etienne Perret
Publisher : John Wiley & Sons
Release Date : 2014-12-04
Category : Technology & Engineering
Total pages :360
GET BOOK

This book deals with the field of identification and sensors, more precisely the possibility of collecting information remotely with RF waves (RFID). The book introduces the technology of chipless RFID starting from classical RFID and barcode, and explores the field of identification and sensors without wire, without batteries, without chip, and with tags that can even be printed on paper. A technique for automatic design of UHF RFID tags is presented , aiming at making the tags as insensitive as possible to the environment (with the ability to increase the reading range reliability), or, conversely, making them sensitive in order to produce sensors, meanwhile keeping their unique ID. The RFID advantages are discussed, along with its numerous features, and comparisons with the barcode technology are presented. After that, the new chipless RFID technology is introduced on the basis of the previous conclusions. Original technological approaches are introduced and discussed in order to demonstrate the practical and economic potential of the chipless technology.

Symmetry Properties in Transmission Lines Loaded with Electrically Small Resonators

Symmetry Properties in Transmission Lines Loaded with Electrically Small Resonators
Author : Jordi Naqui
Publisher : Springer
Release Date : 2015-10-16
Category : Technology & Engineering
Total pages :210
GET BOOK

This book discusses the analysis, circuit modeling, and applications of transmission lines loaded with electrically small resonators (mostly resonators inspired by metamaterials), focusing on the study of the symmetry-related electromagnetic properties of these loaded lines. It shows that the stopband functionality (resonance) that these lines exhibit can be controlled by the relative orientation between the line and the resonator, which determines their mutual coupling. Such resonance controllability, closely related to symmetry, is essential for the design of several microwave components, such as common-mode suppressed differential lines, novel microwave sensors based on symmetry disruption, and spectral signature radio-frequency barcodes. Other interesting aspects, such as stopband bandwidth enhancement (due to inter-resonator coupling, and related to complex modes) and magnetoelectric coupling between the transmission lines and split-ring resonators, are also included in the book.

Green RFID Systems

Green RFID Systems
Author : Luca Roselli
Publisher : Cambridge University Press
Release Date : 2014-09-25
Category : Technology & Engineering
Total pages :304
GET BOOK

Learn how new materials and electronics technologies can make RFID systems more energy efficient and environmentally friendly. Experts show you how energy scavenging, passive/chipless RFID, RFID passive sensors, networked RFID, energy harvesting, organic devices, and wide area electronics can be used to develop green solutions for the Internet of Things.

RFID Systems

RFID Systems
Author : Miodrag Bolic,David Simplot-Ryl,Ivan Stojmenovic
Publisher : John Wiley & Sons
Release Date : 2010-09-23
Category : Technology & Engineering
Total pages :576
GET BOOK

This book provides an insight into the 'hot' field of Radio Frequency Identification (RFID) Systems In this book, the authors provide an insight into the field of RFID systems with an emphasis on networking aspects and research challenges related to passive Ultra High Frequency (UHF) RFID systems. The book reviews various algorithms, protocols and design solutions that have been developed within the area, including most recent advances. In addition, authors cover a wide range of recognized problems in RFID industry, striking a balance between theoretical and practical coverage. Limitations of the technology and state-of-the-art solutions are identified and new research opportunities are addressed. Finally, the book is authored by experts and respected researchers in the field and every chapter is peer reviewed. Key Features: Provides the most comprehensive analysis of networking aspects of RFID systems, including tag identification protocols and reader anti-collision algorithms Covers in detail major research problems of passive UHF systems such as improving reading accuracy, reading range and throughput Analyzes other "hot topics" including localization of passive RFID tags, energy harvesting, simulator and emulator design, security and privacy Discusses design of tag antennas, tag and reader circuits for passive UHF RFID systems Presents EPCGlobal architecture framework, middleware and protocols Includes an accompanying website with PowerPoint slides and solutions to the problems http://www.site.uottawa.ca/~mbolic/RFIDBook/ This book will be an invaluable guide for researchers and graduate students in electrical engineering and computer science, and researchers and developers in telecommunication industry.