September 24, 2020
Download Ebook Free Integrated Circuit And System Design Power And Timing Modeling Optimization And Simulation

Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation

Author : Johan Vounckx
Publsiher :
Release Date :
Category :
Total pages :677

Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation

Author : Vassilis Paliouras,Johan Vounckx
Publsiher :
Release Date :
Category :
Total pages :753

This book constitutes the refereed proceedings of the 15th International Workshop on Power and Timing Optimization and Simulation, PATMOS 2005, held in Leuven, Belgium in September 2005. The 74 revised full papers presented were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on low-power processors, code optimization for low-power, high-level design, telecommunications and signal processing, low-power circuits, system-on-chip design, busses and interconnections, modeling, design automation, low-power techniques, memory and register files, applications, digital circuits, and analog and physical design.

Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation

Author : Lars Svensson,José Monteiro
Publsiher :
Release Date :
Category :
Total pages :462

Welcome to the proceedings of PATMOS 2008, the 18th in a series of int- national workshops. PATMOS 2008 was organized by INESC-ID / IST - TU Lisbon, Portugal, with sponsorship by Cadence, IBM, Chipidea, and Tecmic, and technical co-sponsorship by the IEEE. Over the years, PATMOS has evolved into an important European event, where researchers from both industry and academia discuss and investigate the emerging challenges in future and contemporary applications, design meth- ologies, and tools required for the development of the upcoming generations of integrated circuits and systems. The technical program of PATMOS 2008 c- tained state-of-the-art technical contributions, three invited talks, and a special session on recon?gurable architectures. The technical program focused on t- ing, performance and power consumption, as well as architectural aspects with particular emphasis on modeling, design, characterization, analysis and op- mization in the nanometer era. The Technical Program Committee, with the assistance of additional expert reviewers, selected the 41 papers presented at PATMOS. The papers were - ganized into 7 oral sessions (with a total of 31 papers) and 2 poster sessions (with a total of 10 papers). As is customary for the PATMOS workshops, full papers were required for review, and a minimum of three reviews were received per manuscript.

Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation

Author : Jose L. Ayala,Braulio Garcia-Camara,Manuel Prieto,Martino Ruggiero,Gilles Sicard
Publsiher :
Release Date :
Category :
Total pages :352

This book constitutes the refereed proceedings of the 21st International Conference on Integrated Circuit and System Design, PATMOS 2011, held in Madrid, Spain, in September 2011. The 34 revised full papers presented were carefully reviewed and selected from numerous submissions. The paper feature emerging challenges in methodologies and tools for the design of upcoming generations of integrated circuits and systems and focus especially on timing, performance and power consumption as well as architectural aspects with particular emphasis on modeling, design, characterization, analysis and optimization.

Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation

Author : PATMOS 2003,Jorge Juan Chico,Enrico Macii
Publsiher :
Release Date :
Category :
Total pages :631

This book constitutes the refereed proceedings of the 13th International Workshop on Power and Timing Modeling, Optimization and Simulation, PATMOS 2003, held in Torino, Italy in September 2003. The 43 revised full papers and 18 revised poster papers presented together with three keynote contributions were carefully reviewed and selected from 85 submissions. The papers are organized in topical sections on gate-level modeling and characterization, interconnect modeling and optimization, asynchronous techniques, RTL power modeling and memory optimization, high-level modeling, power-efficient technologies and designs, communication modeling and design, and low-power issues in processors and multimedia.

Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation

Author : José L. Ayala,Delong Shang,Alex Yakovlev
Publsiher :
Release Date :
Category :
Total pages :258

This book constitutes the refereed proceedings of the 22nd International Conference on Integrated Circuit and System Design, PATMOS 2012, held in Newcastle, UK Spain, in September 2012. The 25 revised full papers presented were carefully reviewed and selected from numerous submissions. The paper feature emerging challenges in methodologies and tools for the design of upcoming generations of integrated circuits and systems, including reconfigurable hardware such as FPGAs. The technical program focus on timing, performance and power consumption as well as architectural aspects with particular emphasis on modeling, design, characterization, analysis and optimization.

Integrated Circuit and System Design

Author : N.A
Publsiher :
Release Date :
Category :
Total pages :329

Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation

Author : Nadine Azemard
Publsiher :
Release Date :
Category :
Total pages :583

Annotation This book constitutes the refereed proceedings of the 17th International Workshop on Power and Timing Modeling, Optimization and Simulation, PATMOS 2007, held in Gothenburg, Sweden, in September 2007. The 36 revised full papers and 19 revised poster papers presented together with the abstracts of 3 key notes and 2 industrial papers were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on high-level design, low power design techniques, low power analog circuits, statistical static timing analysis, power modeling and optimization, low power routing optimization, security and asynchronous design, low power applications, modeling and optimization, low power techniques and applications, as well as design challenges in real-life projects.

Integrated Circuit and System Design

Author : Enrico Macii,Vassilis Paliouras
Publsiher :
Release Date :
Category :
Total pages :910

This book constitutes the refereed proceedings of the 14th International Workshop on Power and Timing Optimization and Simulation, PATMOS 2004, held in Santorini, Greece in September 2004. The 85 revised papers presented together with abstracts of 6 invited presentations were carefully reviewed and selected from 152 papers submitted. The papers are organized in topical sections on buses and communication, circuits and devices, low power issues, architectures, asynchronous circuits, systems design, interconnect and physical design, security and safety, low-power processing, digital design, and modeling and simulation.

Integrated Circuit Design: Power and Timing Modeling, Optimization and Simulation

Author : Germany) Patmos 200 (2000 Gottingen,Dimitrios Soudris,Peter Pirsch
Publsiher :
Release Date :
Category :
Total pages :338

ThefourinvitedtalksaddresstheEuropeanresearchactivitiesinthewo- shop?elds,theevolvingneedsforminimalpowerconsumptionintheareaof wirelessandchipcardapplicationsanddesignmethodologiesofveryhighly- tegratedmultimediaprocessors. Theworkshopisaresultofthejointworkofalargenumberofindividuals, whocannotallbementionedhere. Inparticular,wewouldliketoacknowledge theoutstandingworkofthereviewers,whodidacompetentjobinatimely manner. Wealsohavetothankthemembersofthelocalorganizingcommittee fortheire?ortinenablingtheconferencetorunsmoothly. Finally,wegratefully acknowledgethesupportofallorganizationsandinstitutionssponsoringthe conference.

Integrated Circuit Design. Power and Timing Modeling, Optimization and Simulation

Author : Bertrand Hochet,Antonio J. Acosta
Publsiher :
Release Date :
Category :
Total pages :496

This book constitutes the refereed proceedings of the 12th International Workshop on Power and Timing Modeling, Optimization and Simulation, PATMOS 2002, held in Seville, Spain in September 2002. The 37 revised full papers and 12 poster papers presented were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on arithmetics, low-level modeling and characterization, asynchronous and adiabatic techniques, CAD tools and algorithms, timing, gate-level modeling and design, and communications modeling and activity reduction.

Integrated Circuit and System Design: Power and Timing Modeling, Optimization and Simulation

Author : José Monteiro,Rene van Leuken
Publsiher :
Release Date :
Category :
Total pages :370

Welcome to the proceedings of the 19th International Workshop on Power and TimingModeling, OptimizationandSimulation, PATMOS2009.Overtheyears, PATMOShasevolvedintoanimportantEuropeanevent, whereresearchersfrom both industry and academia discuss and investigate the emerging challenges in future and contemporary applications, design methodologies, and tools required for the development of the upcoming generations of integrated circuits and s- tems. PATMOS 2009 was organized by TU Delft, The Netherlands, with sp- sorship by the NIRICT Design Lab and Cadence Design Systems, and technical co-sponsorshipbytheIEEE.Furtherinformationabouttheworkshopisavailable athttp: //ens.ewi.tudelft.nl/patmos09. The technical programof PATMOS 2009 contained state-of-the-arttechnical contributions, three invited keynotes, and a special session on SystemC-AMS Extensions. The technical program focused on timing, performance, and power consumption, as well as architectural aspects with particular emphasis on m- eling, design, characterization, analysis, and optimization in the nanometer era. The Technical Program Committee, with the assistance of additional expert reviewers, selected the 36 papers presented at PATMOS. The papers were - ganized into 7 oral sessions (with a total of 26 papers) and 2 poster sessions (with a total of 10 papers). As is customary for the PATMOS workshops, full papers were required for review, and a minimum of three reviews were received per manuscr

Integrated Circuit and System Design. Power and Timing Modeling, Optimization, and Simulation

Author : GILLES SICARD,René Leuken
Publsiher :
Release Date :
Category :
Total pages :260

Integrated Circuit Design: Power and Timing Modeling, Optimization and Simulation

Author : Germany) Patmos 200 (2000 Gottingen,Dimitrios Soudris,Peter Pirsch
Publsiher :
Release Date :
Category :
Total pages :338

ThefourinvitedtalksaddresstheEuropeanresearchactivitiesinthewo- shop?elds,theevolvingneedsforminimalpowerconsumptionintheareaof wirelessandchipcardapplicationsanddesignmethodologiesofveryhighly- tegratedmultimediaprocessors. Theworkshopisaresultofthejointworkofalargenumberofindividuals, whocannotallbementionedhere. Inparticular,wewouldliketoacknowledge theoutstandingworkofthereviewers,whodidacompetentjobinatimely manner. Wealsohavetothankthemembersofthelocalorganizingcommittee fortheire?ortinenablingtheconferencetorunsmoothly. Finally,wegratefully acknowledgethesupportofallorganizationsandinstitutionssponsoringthe conference.

Logic Synthesis for Low Power VLSI Designs

Author : Sasan Iman,Massoud Pedram
Publsiher :
Release Date :
Category :
Total pages :236

Logic Synthesis for Low Power VLSI Designs presents a systematic and comprehensive treatment of power modeling and optimization at the logic level. More precisely, this book provides a detailed presentation of methodologies, algorithms and CAD tools for power modeling, estimation and analysis, synthesis and optimization at the logic level. Logic Synthesis for Low Power VLSI Designs contains detailed descriptions of technology-dependent logic transformations and optimizations, technology decomposition and mapping, and post-mapping structural optimization techniques for low power. It also emphasizes the trade-off techniques for two-level and multi-level logic circuits that involve power dissipation and circuit speed, in the hope that the readers can better understand the issues and ways of achieving their power dissipation goal while meeting the timing constraints. Logic Synthesis for Low Power VLSI Designs is written for VLSI design engineers, CAD professionals, and students who have had a basic knowledge of CMOS digital design and logic synthesis.

Sorry, but nothing matched your search terms. Please try again with some different keywords.