December 4, 2020

Download Ebook Free Friction Stir Casting Modification For Enhanced Structural Efficiency

Friction Stir Casting Modification for Enhanced Structural Efficiency

Friction Stir Casting Modification for Enhanced Structural Efficiency
Author : Saumyadeep Jana,Rajiv S. Mishra,Glenn Grant
Publisher : Butterworth-Heinemann
Release Date : 2015-10-21
Category : Technology & Engineering
Total pages :108
GET BOOK

Friction Stir Casting Modification for Enhanced Structural Efficiency: A Volume in the Friction Stir Welding and Processing Book Series summarizes current research and applications of friction stir processing techniques for casting modification. Research in this area has shown significant benefit in terms of fatigue performance as a result of friction stir processing. This book addresses the latest research, providing readers with a summary of these results and new guidelines for designers. Provides the benefits of friction stir casting, including its solid phase process, low distortion of workpiece, good dimensional stability and repeatability, high joint strength, and more Summarizes current research and applications of friction stir processing techniques for casting modification Presents it usage in the production of products such as rugs, wire, or any other gases, and its applications for decreased fuel consumption in light weight aircraft, and its automotive and ship applications

Friction Stir Welding and Processing in Alloy Manufacturing

Friction Stir Welding and Processing in Alloy Manufacturing
Author : Carlos Agelet de Saracibar
Publisher : MDPI
Release Date : 2019-08-02
Category : Science
Total pages :144
GET BOOK

This book is a printed edition of the Special Issue Friction Stir Welding and Processing in Alloy Manufacturingthat was published in Metals

Encyclopedia of Aluminum and Its Alloys, Two-Volume Set (Print)

Encyclopedia of Aluminum and Its Alloys, Two-Volume Set (Print)
Author : George E. Totten,Murat Tiryakioglu,Olaf Kessler
Publisher : CRC Press
Release Date : 2018-12-07
Category : Science
Total pages :1232
GET BOOK

This encyclopedia, written by authoritative experts under the guidance of an international panel of key researchers from academia, national laboratories, and industry, is a comprehensive reference covering all major aspects of metallurgical science and engineering of aluminum and its alloys. Topics covered include extractive metallurgy, powder metallurgy (including processing), physical metallurgy, production engineering, corrosion engineering, thermal processing (processes such as metalworking and welding, heat treatment, rolling, casting, hot and cold forming), surface engineering and structure such as crystallography and metallography.

Additive Manufacturing for the Aerospace Industry

Additive Manufacturing for the Aerospace Industry
Author : Francis H. Froes,Rodney Boyer
Publisher : Elsevier
Release Date : 2019-02-15
Category : Technology & Engineering
Total pages :482
GET BOOK

Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. Provides information on a broad range of materials and processes used in additive manufacturing Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry Covers a wide array of materials for use in the additive manufacturing of aerospace parts Discusses current standards in the area of aerospace AM parts

Light Metals 2018

Light Metals 2018
Author : Olivier Martin
Publisher : Springer
Release Date : 2018-01-31
Category : Technology & Engineering
Total pages :1637
GET BOOK

The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2018 collection includes papers from the following symposia: 1.Alumina and Bauxite2.Aluminum Alloys, Processing, and Characterization3.Aluminum Reduction Technology4.Cast Shop Technology5. Cast Shop Technology: Energy Joint Session6. Cast Shop Technology: Fundamentals of Aluminum Alloy Solidification Joint Session7. Cast Shop Technology: Recycling and Sustainability Joint Session8. Electrode Technology for Aluminum Production9. Perfluorocarbon Generation and Emissions from Industrial Processes10. Scandium Extraction and Use in Aluminum Alloys

Friction Stir Welding and Processing

Friction Stir Welding and Processing
Author : Rajiv Sharan Mishra,Partha Sarathi De,Nilesh Kumar
Publisher : Springer
Release Date : 2014-08-04
Category : Technology & Engineering
Total pages :338
GET BOOK

This book lays out the fundamentals of friction stir welding and processing and builds toward practical perspectives. The authors describe the links between the thermo-mechanical aspects and the microstructural evolution and use of these for the development of the friction stir process as a broader metallurgical tool for microstructural modification and manufacturing. The fundamentals behind the practical aspects of tool design, process parameter selection and weld related defects are discussed. Local microstructural refinement has enabled new concepts of superplastic forming and enhanced low temperature forming. The collection of friction stir based technologies is a versatile set of solid state manufacturing tools.

Metal Matrix Composites by Friction Stir Processing

Metal Matrix Composites by Friction Stir Processing
Author : Ranjit Bauri,Devinder Yadav
Publisher : Butterworth-Heinemann
Release Date : 2017-08-10
Category : Technology & Engineering
Total pages :138
GET BOOK

Metal Matrix Composites by Friction Stir Processing discusses the capabilities of utilizing friction stir processing (FSP) as a tool to manufacture new materials, such as composites. FSP is considered a tool for grain refinement. However, this work illustrates how FSP has a wider capability due to the material flow and mixing the process offers. This book highlights such aspects by demonstrating the ability of the process to incorporate a second phase and make metal matrix composites (MMCs). The book covers the current research on processing MMCs by FSP, and presents a novel approach of making ductile MMCs by FSP using metal particle reinforcements. Demonstrates how friction stir processing can be used to make metal matrix composites Includes a review of different approaches of making metal matrix composites by friction stir processing Demonstrates the utility of friction stir processing in making new types of non-equilibrium ductile composites Provides a comparison of properties of friction stir processed composites to those of conventional metal matrix composites

Advances in Friction-Stir Welding and Processing

Advances in Friction-Stir Welding and Processing
Author : M.-K. Besharati-Givi,P. Asadi
Publisher : Elsevier
Release Date : 2014-12-08
Category : Technology & Engineering
Total pages :796
GET BOOK

Friction-stir welding (FSW) is a solid-state joining process primarily used on aluminum, and is also widely used for joining dissimilar metals such as aluminum, magnesium, copper and ferrous alloys. Recently, a friction-stir processing (FSP) technique based on FSW has been used for microstructural modifications, the homogenized and refined microstructure along with the reduced porosity resulting in improved mechanical properties. Advances in friction-stir welding and processing deals with the processes involved in different metals and polymers, including their microstructural and mechanical properties, wear and corrosion behavior, heat flow, and simulation. The book is structured into ten chapters, covering applications of the technology; tool and welding design; material and heat flow; microstructural evolution; mechanical properties; corrosion behavior and wear properties. Later chapters cover mechanical alloying and FSP as a welding and casting repair technique; optimization and simulation of artificial neural networks; and FSW and FSP of polymers. Provides studies of the microstructural, mechanical, corrosion and wear properties of friction-stir welded and processed materials Considers heat generation, heat flow and material flow Covers simulation of FSW/FSP and use of artificial neural network in FSW/FSP

Fatigue in Friction Stir Welding

Fatigue in Friction Stir Welding
Author : J. Brian Jordon,Robert Amaro,Paul Allison,Harish Rao
Publisher : Butterworth-Heinemann
Release Date : 2019-02-27
Category : Technology & Engineering
Total pages :196
GET BOOK

Fatigue in Friction Stir Welding provides knowledge on how to design and fabricate high performance, fatigue resistance FSW joints. It summarizes fatigue characterizations of key FSW configurations, including butt and lap-shear joints. The book's main focus is on fatigue of aluminum alloys, but discussions of magnesium, steel, and titanium alloys are also included. The FSW process-structure-fatigue performance relationships, including tool rotation, travel speeds, and pin tools are covered, along with sections on extreme fatigue conditions and environments, including multiaxial, variable amplitude, and corrosion effects on fatigue of the FSW. From a practical design perspective, appropriate fatigue design guidelines, including engineering and microstructure-sensitive modeling approaches are discussed. Finally, an appendix with numerous representative fatigue curves for design and reference purposes completes the work. Provides a comprehensive characterization of fatigue behavior for various FSW joints and alloy combinations, along with an in-depth presentation on crack initiation and growth mechanisms Presents the relationships between process parameters and fatigue behavior Discusses modeling strategies and design recommendations, along with experimental data for reference purposes

Friction Stir Welding and Processing IX

Friction Stir Welding and Processing IX
Author : Yuri Hovanski,Rajiv Mishra,Yutaka Sato,Piyush Upadhyay,David Yan
Publisher : Springer
Release Date : 2017-02-06
Category : Technology & Engineering
Total pages :324
GET BOOK

This books presents a current look at friction stir welding technology from application to characterization and from modeling to R&D. It is a compilation of the recent progress relating to friction stir technologies including derivative technologies, high-temperature applications, industrial applications, dissimilar alloy/materials, lightweight alloys, simulation, and characterization. With contributions from leaders and experts in industry and academia, this will be a comprehensive source for the field of Friction Stir Welding and Processing.

Modern Manufacturing Engineering

Modern Manufacturing Engineering
Author : J. Paulo Davim
Publisher : Springer
Release Date : 2015-06-19
Category : Technology & Engineering
Total pages :321
GET BOOK

This book covers recent research and trends in Manufacturing Engineering. The chapters emphasize different aspects of the transformation from materials to products. It provides the reader with fundamental materials treatments and the integration of processes. Concepts such as green and lean manufacturing are also covered in this book.

Materials Science

Materials Science
Author : Yitzhak Mastai
Publisher : BoD – Books on Demand
Release Date : 2013-06-10
Category : Science
Total pages :562
GET BOOK

Today modern materials science is a vibrant, emerging scientific discipline at the forefront of physics, chemistry, engineering, biology and medicine, and is becoming increasingly international in scope as demonstrated by emerging international and intercontinental collaborations and exchanges. The overall purpose of this book is to provide timely and in-depth coverage of selected advanced topics in materials science. Divided into five sections, this book provides the latest research developments in many aspects of materials science. This book is of interest to both fundamental research and also to practicing scientists and will prove invaluable to all chemical engineers, industrial chemists and students in industry and academia.

20th Symposium on Composites

20th Symposium on Composites
Author : Christian Edtmaier,Guillermo Requena
Publisher : Trans Tech Publications Ltd
Release Date : 2015-07-13
Category : Technology & Engineering
Total pages :1144
GET BOOK

Collection of selected, peer reviewed papers from the 20th Symposium on Composites, July 1-3, 2015, Vienna, Austria. The 137 papers are grouped as follows: Chapter 1: Polymer Matrix Composites; Chapter 2: Metal Matrix Composites and Interpenetrating Materials; Chapter 3: Ceramic Matrix Composites; Chapter 4: Hybrid Structures, Laminates; Chapter 5: Structural Health Monitoring; Chapter 6: Coatings; Chapter 7: Modelling, Simulation; Chapter 8: Manufacturing Technology, Components/Products/Applications; Chapter 9: Testing and Characterization; Chapter 10: Cemented carbides, Cermets, Wear and Abrasion Materials; Chapter 11: Bio-Composites; Chapter 12: Recycling & Sustainability, Building Materials

Friction Stir Welding and Processing VII

Friction Stir Welding and Processing VII
Author : Rajiv Mishra,Murray Mahoney,Yutaka Sato,Yuri Hovanski,Ravi Verma
Publisher : Springer
Release Date : 2016-12-01
Category : Technology & Engineering
Total pages :362
GET BOOK

This collection focuses on all aspects of science and technology related to friction stir welding and processing.

Materials in Environmental Engineering

Materials in Environmental Engineering
Author : Hadi Haeri
Publisher : Walter de Gruyter GmbH & Co KG
Release Date : 2017-08-21
Category : Technology & Engineering
Total pages :1609
GET BOOK

This contains selected and peer-reviewed papers from the 4th Annual International Conference on Material Science and Environmental Engineering (MSEE), December 16-18 2016, in Chengdu, China. Interactions of building materials, biomaterials, energy materials and nanomaterials with surrounding environment are discussed. With abundant case studies, it is of interests to material scientists and environmental engineers.