June 13, 2021

Download Ebook Free Laser Growth And Processing Of Photonic Devices

Laser Growth and Processing of Photonic Devices

Laser Growth and Processing of Photonic Devices
Author : Nikolaos A Vainos
Publisher : Elsevier
Release Date : 2012-07-10
Category : Technology & Engineering
Total pages :488
GET BOOK

The use of lasers in the processing of electronic and photonic material is becoming increasingly widespread, with technological advances reducing costs and increasing both the quality and range of novel devices which can be produced. Laser growth and processing of photonic devices is the first book to review this increasingly important field. Part one investigates laser-induced growth of materials and surface structures, with pulsed laser deposition techniques, the formation of nanocones and the fabrication of periodic photonic microstructures explored in detail. Laser-induced three-dimensional micro- and nano-structuring are the focus of part two. Exploration of multiphoton lithography, processing and fabrication is followed by consideration of laser-based micro- and nano-fabrication, laser-induced soft matter organization and microstructuring, and laser-assisted polymer joining methods. The book concludes in part three with an investigation into laser fabrication and manipulation of photonic structures and devices. Laser seeding and thermal processing of glass with nanoscale resolution, laser-induced refractive index manipulation, and the thermal writing of photonic devices in glass and polymers are all considered. With its distinguished editor and international team of expert contributors, Laser growth and processing of photonic devices is an essential tool for all materials scientists, engineers and researchers in the microelectronics industry. The first book to review the increasingly important field of laser growth and processing of photonic devices Investigates laser-induced growth of materials and surface structures, pulsed laser deposition techniques, the formation of nanocones and the fabrication of periodic photonic microstructures Examines laser-induced three-dimensional micro- and nano-structuring and concludes with an investigation into laser fabrication and manipulation of photonic structures and devices

Optical Biomimetics

Optical Biomimetics
Author : Maryanne Large
Publisher : Elsevier
Release Date : 2012-09-24
Category : Science
Total pages :256
GET BOOK

Optical biomimetics, the study of natural systems to inspire novel solutions to problems in optical technologies, has attracted growing interest. Optical biomimetics reviews key research in this area, focusing on the techniques and approaches used to characterise and mimic naturally occurring optical effects. Beginning with an overview of natural photonic structures, Optical biomimetics goes on to discuss optical applications of biomolecules, such as retinylidene and bacteriorhodopsin, polarisation effects in natural photonic structures and their applications, and biomimetic nanostructures for anti-reflection (AR) devices. Control of iridescence in natural photonic structures is explored through the case of butterfly scales, alongside a consideration of nanostructure fabrication using natural synthesis. The investigation into silk optical materials is followed by a final discussion of the control of florescence in natural photonic structures. With its distinguished editor and international team of expert contributors, Optical biomimetics is a valuable guide for scientists and engineers in both academia and industry who are already studying biomimetics, and a fascinating introduction for those who wish to move into this interesting new field. Reviews key research in optical biomimetics, focusing on the techniques and approaches used to characterise and mimic naturally-occurring optical effects Discusses optical applications of biomolecules, such as retinylidene and bacteriorhodopsin Explores the control of iridescence in natural photonic structures through the case of butterfly scales

Optics Education

Optics Education
Author : Anonim
Publisher : Unknown
Release Date : 2004
Category : Optics
Total pages :129
GET BOOK

Fourth Asia Pacific Physics Conference

Fourth Asia Pacific Physics Conference
Author : S. H. Cho
Publisher : Unknown
Release Date : 1990
Category :
Total pages :129
GET BOOK

Laser Applications in Microelectronic and Optoelectronic Manufacturing

Laser Applications in Microelectronic and Optoelectronic Manufacturing
Author : Anonim
Publisher : Unknown
Release Date : 2000
Category : Lasers
Total pages :129
GET BOOK

III-V Electronic and Photonic Device Fabrication and Performance: Volume 300

III-V Electronic and Photonic Device Fabrication and Performance: Volume 300
Author : K. S. Jones,S. J. Pearton,H. Kanber
Publisher : Materials Research Society Sym
Release Date : 1993-08-25
Category : Technology & Engineering
Total pages :620
GET BOOK

The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.

NEC Research & Development

NEC Research & Development
Author : Anonim
Publisher : Unknown
Release Date : 1995
Category : Electric apparatus and appliances
Total pages :129
GET BOOK

Fabrication of Quantum Wire Heterostructures and Short Wavelength Photonic Devices Using the Strain-induced Lateral-layer Ordering Process

Fabrication of Quantum Wire Heterostructures and Short Wavelength Photonic Devices Using the Strain-induced Lateral-layer Ordering Process
Author : Arnold Chung-Ye Chen
Publisher : Unknown
Release Date : 1996
Category :
Total pages :290
GET BOOK

Research is currently underway on a variety of approaches to improve semiconductor laser performance. The use of quantum size effects has been studied for over 25 years. It has been predicted and shown that the incorporation of one-dimensionally confined quantum wells into laser devices can significantly improve their performance. The next logical step is to incorporate two-dimensionally confined quantum wire (QWR) structures into laser devices. This thesis examines the in situ fabrication of QWRs, formed during molecular beam epitaxy growth, using the strain-induced lateral-layer ordering (SILO) process. The SILO process has many distinct advantages over other fabrication techniques: no pre-growth nor post-growth processing is necessary, no misoriented substrates are required, in situ growth prevents damage near QWR interfaces, high densities of quantum wires are formed, and high room temperature luminescence efficiency is achieved. It is also a versatile growth technique, which can be applied to many different material systems. The SILO process creates a lateral composition modulation along the (110) direction, on a (001) substrate surface during the growth of short-period superlattices. It was found that this modulation is initiated from the microscopic strain on the surface during growth and that the modulated growth mode is stable once initiated. The induced lateral (110) composition modulation is large enough (20%) to produce a significant band gap discontinuity, while the modulation period is small enough (200 A) to induce quantum size effects. The combination of these effects produces lateral quantum wells (LQWs). Using the growth of GaInP LQWs, several different growth conditions were investigated. As expected, an increased substrate temperature produces a larger composition modulation. It was also determined that the LQWs always formed along the ($bar 1$ 10) direction, primarily determined by the direction of the group-V dimer bonds on the surface during growth. By coupling the one-dimensional confinement attainable from the LQWs, we are able to couple this with conventional quantum wells to obtain two-dimensionally confined structures. We utilize the SILO process for the growth of QWR heterostructures in the GaInP/GaAsP (6000 A), GaInP/GaAs (7000 A), GaInAsP/GaAs (1 $mu$m), and GaInAs/InP (1.7 $mu$m) material systems and provide evidence to assure two-dimensional confinement. We were able to accurately model the band structure for GaInP QWR heterostructures utilizing the model solid theory. By comparing the calculated transition energies to photoluminescence experiments, it was found that the triaxial strain variation inside the QWRs takes on a sinusoidal form along the (110) direction. Finally, we demonstrate laser diode and light-emitting diode performance for visible spectrum QWR devices created using the SILO process. GaInP/GaAs laser diodes exhibited the anisotropic threshold current densities predicted from the QWR theory. At room temperature, devices exhibited threshold current densities of three times lower than in quantum well reference samples. Using the strain balance mechanism, short wavelength QWR light-emitting diodes, with emission near 6500 A(red), were fabricated on GaAsP substrates.

Photonic Crystal Materials and Devices III (i.e. V)

Photonic Crystal Materials and Devices III (i.e. V)
Author : Richard M. De La Rue,Society of Photo-optical Instrumentation Engineers
Publisher : Society of Photo Optical
Release Date : 2006
Category : Technology & Engineering
Total pages :626
GET BOOK

Proceedings of SPIE present the original research papers presented at SPIE conferences and other high-quality conferences in the broad-ranging fields of optics and photonics. These books provide prompt access to the latest innovations in research and technology in their respective fields. Proceedings of SPIE are among the most cited references in patent literature.

Memoirs of the Institute of Scientific and Industrial Research, Osaka University

Memoirs of the Institute of Scientific and Industrial Research, Osaka University
Author : Ōsaka Daigaku. Sangyō Kagaku Kenkyūjo
Publisher : Unknown
Release Date : 2002
Category : Research
Total pages :129
GET BOOK

Design, Fabrication, and Characterization of Photonic Devices

Design, Fabrication, and Characterization of Photonic Devices
Author : Anonim
Publisher : Unknown
Release Date : 1999
Category : Optoelectronic devices
Total pages :129
GET BOOK

Microelectronic Packaging and Laser Processing

Microelectronic Packaging and Laser Processing
Author : Yong-Khim Swee,Hong Yu Zheng,Ray T. Chen
Publisher : SPIE-International Society for Optical Engineering
Release Date : 1997
Category : Interconnects (Integrated circuit technology)
Total pages :230
GET BOOK

IEICE Transactions on Electronics

IEICE Transactions on Electronics
Author : Anonim
Publisher : Unknown
Release Date : 2005
Category : Electrical engineering
Total pages :129
GET BOOK

Optical Technology for Microwave Applications

Optical Technology for Microwave Applications
Author : Anonim
Publisher : Unknown
Release Date : 1997
Category : Electrooptical devices
Total pages :129
GET BOOK

Proceedings of the Symposium on Large Area Wafer Growth and Processing for Electronic and Photonic Devices and the Twentieth State-of-the Art Program on Compound Semiconductors (SOTAPOCS XX)

Proceedings of the Symposium on Large Area Wafer Growth and Processing for Electronic and Photonic Devices and the Twentieth State-of-the Art Program on Compound Semiconductors (SOTAPOCS XX)
Author : D. N. Buckley,S. A. Ringel,F. Ren
Publisher : The Electrochemical Society
Release Date : 1995
Category : Compound semiconductors
Total pages :324
GET BOOK