November 26, 2020

Download Ebook Free Mechanics Of Offshore Pipelines

Mechanics of Offshore Pipelines

Mechanics of Offshore Pipelines
Author : Stelios Kyriakides,Edmundo Corona
Publisher : Elsevier Science Limited
Release Date : 2007-08-09
Category : Science
Total pages :401
GET BOOK

Offshore oil and gas production was conducted throughout the entire 20th century, but the industry's modern importance and vibrancy did not start until the early 1970s, when the North Sea became a major producer. Since then, the expansion of the offshore oil industry has been continuous and rapid. Pipelines, and more generally long tubular structures, are major oil and gas industry tools used in exploration, drilling, production, and transmission. Installing and operating tubular structures in deep waters places unique demands on them. Technical challenges within the field have spawned significant research and development efforts in a broad range of areas. Volume I addresses problems of buckling and collapse of long inelastic cylinders under various loads encountered in the offshore arena. Several of the solutions are also directly applicable to land pipelines. The approach of Mechanics of Offshore Pipelines is problem oriented. The background of each problem and scenario are first outlined and each discussion finishes with design recommendations. * New and classical problems addressed - investigated through a combination of experiments and analysis * Each chapter deals with a specific mechanical problem that is analyzed independently * The fundamental nature of the problems makes them also applicable to other fields, including tubular components in nuclear reactors and power plants, aerospace structures, automotive and civil engineering structures, naval vehicles and structures

Mechanics of Offshore Pipelines, Volume 2

Mechanics of Offshore Pipelines, Volume 2
Author : Stelios Kyriakides,Liang-Hai Lee
Publisher : Gulf Professional Publishing
Release Date : 2020-09-25
Category : Science
Total pages :452
GET BOOK

Buckle propagation is a problem unique to offshore pipelines, in which the local collapse of a locally weakened section of the pipe initiates a collapse that propagates at high speed catastrophically flattening the line by kilometers. The lowest pressure that can sustain the propagation of the collapse, the propagation pressure, is only a small fraction of the collapse pressure of the intact pipe. The large difference between these two pressures requires that pipelines be designed on the collapse pressure, and the extent of the potential catastrophic damage suffered is limited by the periodic introduction of buckle arrestors to the line. Volume 2 of the book series Mechanics of Offshore Pipelines addresses the major aspects of buckle propagation including its initiation, establishment of the propagation pressure, and the dynamics of buckle propagation. Buckle propagation under tension, in pipe-in-pipe pipeline systems, and confined buckle propagation in tubulars such as grouted casing are examined in dedicated chapters. Three chapters deal with the performance of the most commonly used buckle arrestors under both quasi-static and dynamic buckle propagation. Each of these problems is studied through experiments, analyses, and large-scale numerical simulations. The results are used to provide empirical design equations and design guidelines on how to mitigate the effects of buckle propagation. Buckle propagation and arrest approached from both fundamental and applied points of view Provides data, empirical design formulae, and design guidelines Teaches how to analyze buckle propagation and mitigate its effects through experiment and modeling Based on the 40-year research and practice of the most eminent researcher in the subject

Mechanics of Offshore Pipelines

Mechanics of Offshore Pipelines
Author : Stelios Kyriakides,Edmundo Corona
Publisher : Elsevier
Release Date : 2007-07-26
Category : Technology & Engineering
Total pages :448
GET BOOK

Offshore oil and gas production was conducted throughout the entire 20th century, but the industry’s modern importance and vibrancy did not start until the early 1970s, when the North Sea became a major producer. Since then, the expansion of the offshore oil industry has been continuous and rapid. Pipelines, and more generally long tubular structures, are major oil and gas industry tools used in exploration, drilling, production, and transmission. Installing and operating tubular structures in deep waters places unique demands on them. Technical challenges within the field have spawned significant research and development efforts in a broad range of areas. Volume I addresses problems of buckling and collapse of long inelastic cylinders under various loads encountered in the offshore arena. Several of the solutions are also directly applicable to land pipelines. The approach of Mechanics of Offshore Pipelines is problem oriented. The background of each problem and scenario are first outlined and each discussion finishes with design recommendations. * New and classical problems addressed - investigated through a combination of experiments and analysis * Each chapter deals with a specific mechanical problem that is analyzed independently * The fundamental nature of the problems makes them also applicable to other fields, including tubular components in nuclear reactors and power plants, aerospace structures, automotive and civil engineering structures, naval vehicles and structures

Offshore Pipelines

Offshore Pipelines
Author : Tian Ran Lin, PhD,Boyun Guo,,Shanhong Song, Ph.D.,Ali Ghalambor, PhD,Jacob Chacko
Publisher : Elsevier
Release Date : 2005-04-25
Category : Technology & Engineering
Total pages :304
GET BOOK

Offshore Pipelines covers the full scope of pipeline development from pipeline designing, installing, and testing to operating. It gathers the authors' experiences gained through years of designing, installing, testing, and operating submarine pipelines. The aim is to provide engineers and management personnel a guideline to achieve cost-effective management in their offshore and deepwater pipeline development and operations. The book is organized into three parts. Part I presents design practices used in developing submarine oil and gas pipelines and risers. Contents of this part include selection of pipe size, coating, and insulation. Part II provides guidelines for pipeline installations. It focuses on controlling bending stresses and pipe stability during laying pipelines. Part III deals with problems that occur during pipeline operations. Topics covered include pipeline testing and commissioning, flow assurance engineering, and pigging operations. This book is written primarily for new and experienced engineers and management personnel who work on oil and gas pipelines in offshore and deepwater. It can also be used as a reference for college students of undergraduate and graduate levels in Ocean Engineering, Mechanical Engineering, and Petroleum Engineering. * Pipeline design engineers will learn how to design low-cost pipelines allowing long-term operability and safety. * Pipeline operation engineers and management personnel will learn how to operate their pipeline systems in a cost effective manner. * Deepwater pipelining is a new technology developed in the past ten years and growing quickly.

Subsea Pipelines and Risers

Subsea Pipelines and Risers
Author : Yong Bai,Qiang Bai
Publisher : Elsevier
Release Date : 2005-12-05
Category : Technology & Engineering
Total pages :840
GET BOOK

• Updated edition of a best-selling title • Author brings 25 years experience to the work • Addresses the key issues of economy and environment Marine pipelines for the transportation of oil and gas have become a safe and reliable way to exploit the valuable resources below the world’s seas and oceans. The design of these pipelines is a relatively new technology and continues to evolve in its quest to reduce costs and minimise the effect on the environment. With over 25years experience, Professor Yong Bai has been able to assimilate the essence of the applied mechanics aspects of offshore pipeline system design in a form of value to students and designers alike. It represents an excellent source of up to date practices and knowledge to help equip those who wish to be part of the exciting future of this industry.

Exam Prep Flash Cards for Mechanics of Offshore Pipelines

Exam Prep Flash Cards for Mechanics of Offshore Pipelines
Author : Anonim
Publisher : Unknown
Release Date : 2020
Category :
Total pages :129
GET BOOK

Offshore Pipeline Design, Analysis, and Methods

Offshore Pipeline Design, Analysis, and Methods
Author : A. H. Mousselli
Publisher : Pennwell Corporation
Release Date : 1981
Category : Natural gas in submerged lands
Total pages :193
GET BOOK

Subsea Pipeline Design, Analysis, and Installation

Subsea Pipeline Design, Analysis, and Installation
Author : Qiang Bai,Yong Bai
Publisher : Gulf Professional Publishing
Release Date : 2014-02-18
Category : Technology & Engineering
Total pages :824
GET BOOK

As deepwater wells are drilled to greater depths, pipeline engineers and designers are confronted with new problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility. Subsea Pipeline Design, Analysis and Installation is based on the authors' 30 years of experience in offshore. The authors provide rigorous coverage of the entire spectrum of subjects in the discipline, from pipe installation and routing selection and planning to design, construction, and installation of pipelines in some of the harshest underwater environments around the world. All-inclusive, this must-have handbook covers the latest breakthroughs in subjects such as corrosion prevention, pipeline inspection, and welding, while offering an easy-to-understand guide to new design codes currently followed in the United States, United Kingdom, Norway, and other countries. Gain expert coverage of international design codes Understand how to design pipelines and risers for today's deepwater oil and gas Master critical equipment such as subsea control systems and pressure piping

Offshore Pipelines Ebook Collection

Offshore Pipelines Ebook Collection
Author : Yong Bai,Qiang Bai,Boyun Guo,Stelios Kyriakides,Wilson C Chin, PhD,John Tiratsoo
Publisher : Gulf Professional Pub
Release Date : 2008-07-22
Category : Technology & Engineering
Total pages :2184
GET BOOK

Offshore Pipelines ebook Collection contains 5 of our best-selling titles, providing the ultimate reference for every offshore pipeline professional's library. Get access to over 2000 pages of reference material, at a fraction of the price of the hard-copy books. This CD contains the complete ebooks of the following 5 titles: Bai, Subsea Pipelines and Risers, 9780080445663 Guo, Offshore Pipelines: Design, Installation, and Operation, 9780750678476 Kyriakides, Mechanics of Offshore Pipelines, 9780080467320 Chin, Computational Rheology: Pipeline, 9780884153207 Tiratsoo, Pipeline Pigging Technology, 2nd Edition, 9780872014268 *Five fully searchable titles on one CD providing instant access to the ULTIMATE library of engineering materials for pipeline professionals. *2000 pages of practical and theoretical pipeline information in one portable package. *Incredible value at a fraction of the cost of the print books

The Offshore Pipeline Construction Industry

The Offshore Pipeline Construction Industry
Author : Mark J. Kaiser
Publisher : Gulf Professional Publishing
Release Date : 2020-04-08
Category : Business & Economics
Total pages :502
GET BOOK

The Offshore Pipeline Construction Industry: Activity Modeling and Cost Estimation in the United States Gulf of Mexico presents the latest technical concepts and economic calculations, helping engineers make better business decisions. The book covers flow assurance, development strategies on pipeline requirements and the construction service side with a global perspective. In addition, it focuses on one of the most underdeveloped, promising assets – the Gulf of Mexico. Pipeline construction and decommissioning estimation methods are examined with reliable data presented. A final section covers trends for oil, gas, bulk oil, bulk gas, service and umbilical pipelines for installation and decommissioning using correlation models. This book delivers a much-needed tool for the pipeline engineer to better understand the economical choices and alternatives to designing, constructing, and operating today’s offshore pipelines. Built with construction and decommissioning decision tools supported by reliable data and case studies Organized by parts, including a section devoted to Gulf of Mexico statistics and estimation methods Helps readers gain practical knowledge on strategies and cost models from a global pipeline perspective, including environmental and mitigation considerations

Subsea Pipeline Engineering

Subsea Pipeline Engineering
Author : Andrew Clennel Palmer,Roger A. King
Publisher : PennWell Books
Release Date : 2008
Category : Technology & Engineering
Total pages :624
GET BOOK

Authored by two of the world's most respected authorities in subsea pipeline engineering, this definitive reference book covers the entire spectrum of subjects in the discipline, from route selection and planning to design, construction, installation, materials and corrosion, inspection, welding, repair, risk assessment, and applicable design codes and standards. Particular attention is also devoted to the important specialized subjects of hydraulics, strength, stability, fracture, and buckling.

Pipelines and Risers

Pipelines and Risers
Author : Yong Bai
Publisher : Elsevier
Release Date : 2001-02-07
Category : Technology & Engineering
Total pages :520
GET BOOK

Pipelines and Risers

Subsea Engineering Handbook

Subsea Engineering Handbook
Author : Yong Bai,Qiang Bai
Publisher : Gulf Professional Publishing
Release Date : 2012
Category : Technology & Engineering
Total pages :919
GET BOOK

Subsea production systems, overview of subsea engineering, subsea field development, subsea distribution system.Flow assurance and system engineering. Susea structure and equiment. Subsea umbilical, risers and flowlines.

Oil and Gas Pipelines

Oil and Gas Pipelines
Author : R. Winston Revie
Publisher : John Wiley & Sons
Release Date : 2015-04-20
Category : Science
Total pages :856
GET BOOK

A comprehensive and detailed reference guide on the integrity and safety of oil and gas pipelines, both onshore and offshore Covers a wide variety of topics, including design, pipe manufacture, pipeline welding, human factors, residual stresses, mechanical damage, fracture and corrosion, protection, inspection and monitoring, pipeline cleaning, direct assessment, repair, risk management, and abandonment Links modern and vintage practices to help integrity engineers better understand their system and apply up-to-date technology to older infrastructure Includes case histories with examples of solutions to complex problems related to pipeline integrity Includes chapters on stress-based and strain-based design, the latter being a novel type of design that has only recently been investigated by designer firms and regulators Provides information to help those who are responsible to establish procedures for ensuring pipeline integrity and safety

Subsea Pipeline Integrity and Risk Management

Subsea Pipeline Integrity and Risk Management
Author : Yong Bai,Qiang Bai
Publisher : Gulf Professional Publishing
Release Date : 2014-02-21
Category : Technology & Engineering
Total pages :428
GET BOOK

Subsea repairs and inspection are costly for petroleum and pipeline engineers and proper training is needed to focus on ensuring system strength and integrity. Subsea Pipeline Integrity and Risk Management is the perfect companion for new engineers who need to be aware of the state-of-the-art techniques. This handbook offers a "hands-on" problem-solving approach to integrity management, leak detection, and reliability applications such as risk analysis. Wide-ranging and easy-to-use, the book is packed with data tables, illustrations, and calculations, with a focus on pipeline corrosion, flexible pipes, and subsea repair. Reliability-based models also provide a decision making tool for day-to-day use. Subsea Pipeline Integrity and Risk Management gives the engineer the power and knowledge to protect offshore pipeline investments safely and effectively. Includes material selection for linepipe, especially selection of standard carbon steel linepipe Covers assessment of various types of corrosion processes and definition of anti-corrosion design against internal as well as external corrosion Gives process and flow assurance for pipeline systems including pipeline integrity management