January 25, 2021

Download Ebook Free Modeling Of Material Behavior Under Elastic-Plastic Strain And Fatigue Loading

Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials

Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials
Author : P.D. Portella,K.-T. Rie
Publisher : Elsevier
Release Date : 1998-09-30
Category : Technology & Engineering
Total pages :890
GET BOOK

The 4th International Conference on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials was held from 7-11 September 1998 in Garmisch-Partenkirchen, Germany. In response to a call for papers, nearly 200 extended abstracts from 32 countries were submitted to the organizing committee. These papers were presented at the conference as invited lectures or short contributions and as oral or poster presentation. All the papers were presented in poster form in extended poster sessions–a peculiarity of the LCF Conferences which allows an intense, thorough discussion of all contributions. Each chapter provides a comprehensive overview of a materials class or a given subject. Many contributions could have been included in two or even three chapters and so, in order to give a better overview of the content, the reader will find a subject index, a material index and an author index in the back of the book.

Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials—3

Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials—3
Author : K.T. Rie,H.W. Grünling,G. König,P. Neumann,H. Nowack,K.-H. Schwalbe,T. Seeger
Publisher : Springer Science & Business Media
Release Date : 2012-12-06
Category : Science
Total pages :888
GET BOOK

Proceeds of the Third International Conference on Low Cycle Fatigue and Elasto-plastic Behaviour of Materials, Berlin Congress Center, Berlin, Germany, 7-11 September 1992

Solder Joint Reliability Assessment

Solder Joint Reliability Assessment
Author : Mohd N. Tamin,Norhashimah M. Shaffiar
Publisher : Springer Science & Business
Release Date : 2014-04-26
Category : Technology & Engineering
Total pages :174
GET BOOK

This book presents a systematic approach in performing reliability assessment of solder joints using Finite Element (FE) simulation. Essential requirements for FE modelling of an electronic package or a single reflowed solder joint subjected to reliability test conditions are elaborated. These cover assumptions considered for a simplified physical model, FE model geometry development, constitutive models for solder joints and aspects of FE model validation. Fundamentals of the mechanics of solder material are adequately reviewed in relation to FE formulations. Concept of damage is introduced along with deliberation of cohesive zone model and continuum damage model for simulation of solder/IMC interface and bulk solder joint failure, respectively. Applications of the deliberated methodology to selected problems in assessing reliability of solder joints are demonstrated. These industry-defined research-based problems include solder reflow cooling, temperature cycling and mechanical fatigue of a BGA package, JEDEC board-level drop test and mechanisms of solder joint fatigue. Emphasis is placed on accurate quantitative assessment of solder joint reliability through basic understanding of the mechanics of materials as interpreted from results of FE simulations. The FE simulation methodology is readily applicable to numerous other problems in mechanics of materials and structures.

Cyclic plasticity modeling and multiaxial fatigue assessment for an austenitic steel

Cyclic plasticity modeling and multiaxial fatigue assessment for an austenitic steel
Author : Jie Fang
Publisher : Herbert Utz Verlag
Release Date : 2015-07-23
Category :
Total pages :152
GET BOOK

The present work aims at engineers and scientists in the field of computational mechanics of materials. The objective of this work is to develop a suitable constitutive law and apply it to study effects of cyclic loading and geometry on the fatigue assessment. Firstly, a systematical investigation on the mechanic behaviors of an austenitic stainless steel is carried out. Different multiaxial fatigue life prediction models are studied to assess fatigue damage. The Karim-Ohno kinematic hardening model is extended to incorporate more complex mechanical behaviors. The proposed constitutive model is implemented into FEM code ABAQUS. Finally a computational fatigue analysis methodology is proposed for performing life prediction of notched components based on elastic-plastic computation.

Monotonic and Ultra-Low-Cycle Fatigue Behaviour of Pipeline Steels

Monotonic and Ultra-Low-Cycle Fatigue Behaviour of Pipeline Steels
Author : António Augusto Fernandes,Abílio M.P. de Jesus,Renato Natal Jorge
Publisher : Springer
Release Date : 2018-06-15
Category : Technology & Engineering
Total pages :524
GET BOOK

This book covers the development of innovative computational methodologies for the simulation of steel material fracture under both monotonic and ultra-low-cycle fatigue. The main aspects are summarised as follows: i) Database of small and full-scale testing data covering the X52, X60, X65, X70 and X80 piping steel grades. Monotonic and ULCF tests of pipe components were performed (buckled and dented pipes, elbows and straight pipes). ii) New constitutive models for both monotonic and ULCF loading are proposed. Besides the Barcelona model, alternative approaches are presented such as the combined Bai-Wierzbicki-Ohata-Toyoda model. iii) Developed constitutive models are calibrated and validated using experimentally derived testing data. Guidelines for damage simulation are included. The book could be seen as a comprehensive repository of experimental results and numerical modeling on advanced methods dealing with Ultra Low Cycle Fatigue of Pipelines when subjected to high strain loading conditions.

Fatigue and Durability of Structural Materials

Fatigue and Durability of Structural Materials
Author : Gary R. Halford
Publisher : ASM International
Release Date : 2006
Category : TECHNOLOGY & ENGINEERING
Total pages :456
GET BOOK

Fatigue and Durability of Structural Materials explains how mechanical material behavior relates to the design of structural machine components. The major emphasis is on fatigue and failure behavior using engineering models that have been developed to predict, in advance of service, acceptable fatigue and other durability-related lifetimes. The book covers broad classes of materials used for high-performance structural applications such as aerospace components, automobiles, and power generation systems. Coverage focuses on metallic materials but also addresses unique capabilities of important nonmetals. The concepts are applied to behavior at room or ambient temperatures; a planned second volume will address behavior at higher-temperatures. The volume is a repository of the most significant contributions by the authors to the art and science of material and structural durability over the past half century. During their careers, including 40 years of direct collaboration, they have developed a host of durability models that are based on sound physical and engineering principles. Yet, the models and interpretation of behavior have a unique simplicity that is appreciated by the practicing engineer as well as the beginning student. In addition to their own pioneering work, the authors also present the work of numerous others who have provided useful results that have moved progress in these fields. This book will be of immense value to practicing mechanical and materials engineers and designers charged with producing structural components with adequate durability. The coverage is appropriate for a range of technical levels from undergraduate engineering students through material behavior researchers and model developers. It will be of interest to personnel in the automotive and off-highway vehicle manufacturing industry, the aeronautical industry, space propulsion and the power generation/conversion industry, the electric power industry, the machine tool industry, and any industry associated with the design and manufacturing of mechanical equipment subject to cyclic loads.

Advances in Multiaxial Fatigue

Advances in Multiaxial Fatigue
Author : David L. McDowell,Rod Ellis
Publisher : ASTM International
Release Date : 1993
Category : Technology & Engineering
Total pages :455
GET BOOK

Papers presented at the ASTM Symposium on Multiaxial Fatigue, held in San Diego, November 1991, to communicate the most recent international advances in multiaxial cyclic deformation and fatigue research as well as applications to component analysis and design. The 24 papers are grouped into five ca

Metal Matrix Composites

Metal Matrix Composites
Author : International Conference on Composite Materials
Publisher : Woodhead Publishing
Release Date : 1993
Category : Composite materials
Total pages :925
GET BOOK

Multiaxial Fatigue

Multiaxial Fatigue
Author : Keith John Miller,Michael W. Brown,M. W. Brown
Publisher : ASTM International
Release Date : 1985
Category : Technology & Engineering
Total pages :741
GET BOOK

Mechanics of Composite Materials

Mechanics of Composite Materials
Author : Zvi Hashin,Carl T. Herakovich
Publisher : Elsevier
Release Date : 2013-10-22
Category : Technology & Engineering
Total pages :512
GET BOOK

Mechanics of Composite Materials: Recent Advances covers the proceedings of the International Union of Theoretical and Applied Mechanics (IUTAM) Symposium on Mechanics of Composite Materials. The book reviews papers that emphasize fundamental mechanics, developments, and unresolved problems of the field. The text covers topics such as mechanical properties of composite materials; influence of microstructure on the thermoplastics and transport properties of particulate and short-fiber composites; and further applications of the systematic theory of materials with disordered constitution. The selection also explains the curved thermal crack growth in the interface of a unidirectional carbon-aluminum composite and energy release rates of various microcracks in short-fiber composites. The book will be of great interest to researchers and professionals whose line of work requires the understanding of the mechanics of composite materials.

Advances in Heterogeneous Material Mechanics 2008

Advances in Heterogeneous Material Mechanics 2008
Author : Jinghong Fan,Haibo Chen
Publisher : DEStech Publications, Inc
Release Date : 2008
Category : Technology & Engineering
Total pages :1714
GET BOOK

This book offers over 400 never before published and rigorously refereed papers demonstrating the connections between nanoscale phenomena and the critical properties of dozens of engineered and natural materials—from polymer composites to human bone. Information is presented on new techniques for studying and quantifying the behavior of materials at nanoscale levels and linking this data to macroscale properties such as strength, fatigue, and failure points. The techniques include novel experiments and uses of instrumentation, as well as modeling and numerical methods. Virtually all the analyses in this book are offered here for the first time. They include information of value for materials investigators in defense, civil engineering, biomaterials, and transportation

Innovation in Testing and Evaluation of Structural Integrity

Innovation in Testing and Evaluation of Structural Integrity
Author : Xu Chen,Shan Tung Tu
Publisher : Trans Tech Publications Ltd
Release Date : 2016-09-30
Category : Technology & Engineering
Total pages :564
GET BOOK

This edition is published by results of the 2016 International Symposium on Structural Integrity (ISSI2016, May 26-30, 2016, Tianjin, China). The articles cover a variety of topics associated with testing, evaluation and with provision the structural integrity of machines, machines parts and structures. The publication of the proceedings aims to present the current solutions in the field of the structural integrity research.

Thermomechanical Fatigue Behavior of Materials

Thermomechanical Fatigue Behavior of Materials
Author : Huseyin Sehitoglu
Publisher : ASTM International
Release Date : 1993
Category : AIIoys
Total pages :252
GET BOOK

Manufacturing Engineering and Materials Handling--2005

Manufacturing Engineering and Materials Handling--2005
Author : Anonim
Publisher : Unknown
Release Date : 2005
Category : Machining
Total pages :1487
GET BOOK

Proceedings of "First IJFatigue & FFEMS Joint Workshop"

Proceedings of
Author : M. N. James,J. R. Yates,L. Susmel
Publisher : Gruppo Italiano Frattura
Release Date : 2011-03-10
Category : Technology & Engineering
Total pages :129
GET BOOK