April 13, 2021

Download Ebook Free Plastic Analysis And Design Of Steel Structures

Plastic Analysis and Design of Steel Structures

Plastic Analysis and Design of Steel Structures
Author : M. Bill Wong
Publisher : Butterworth-Heinemann
Release Date : 2011-08-30
Category : Technology & Engineering
Total pages :256
GET BOOK

The plastic analysis method has been used extensively by engineers for designing steel structures. Simpler structures can be analyzed using the basic virtual work formulation, but more complex frames are evaluated with specialist computer software. This new book sets out a method for carrying out plastic analysis of complex structures without the need for specialist tools. The book provides an introduction to the use of linear programming techniques for plastic analysis. This powerful and advanced method for plastic analysis is important in an automated computational environment, in particular for non-linear structural analysis. A detailed comparison between the design codes for the United States and Australia and the emerging European Eurocodes enables practising engineers to understand the issues involved in plastic design procedures and the limitations imposed by this design method. * Covers latest research in plastic analysis and analytical tools * Introduces new successive approximation method for calculating collapse loads * Programming guide for using spreadsheet tools for plastic analysis

Design of Steel Structures

Design of Steel Structures
Author : Elias G. Abu-Saba
Publisher : Springer Science & Business Media
Release Date : 2012-12-06
Category : Technology & Engineering
Total pages :391
GET BOOK

This book is intended for classroom teaching in architectural and civil engineering at the graduate and undergraduate levels. Although it has been developed from lecture notes given in structural steel design, it can be useful to practicing engineers. Many of the examples presented in this book are drawn from the field of design of structures. Design of Steel Structures can be used for one or two semesters of three hours each on the undergraduate level. For a two-semester curriculum, Chapters 1 through 8 can be used during the first semester. Heavy emphasis should be placed on Chapters 1 through 5, giving the student a brief exposure to the consideration of wind and earthquakes in the design of buildings. With the new federal requirements vis a vis wind and earthquake hazards, it is beneficial to the student to have some under standing of the underlying concepts in this field. In addition to the class lectures, the instructor should require the student to submit a term project that includes the complete structural design of a multi-story building using standard design procedures as specified by AISC Specifications. Thus, the use of the AISC Steel Construction Manual is a must in teaching this course. In the second semester, Chapters 9 through 13 should be covered. At the undergraduate level, Chapters 11 through 13 should be used on a limited basis, leaving the student more time to concentrate on composite construction and built-up girders.

Comprehensive Design of Steel Structures

Comprehensive Design of Steel Structures
Author : B. C. Punmia
Publisher : Firewall Media
Release Date : 1998
Category : Building, Iron and steel
Total pages :1156
GET BOOK

Ductile Design of Steel Structures, 2nd Edition

Ductile Design of Steel Structures, 2nd Edition
Author : Michel Bruneau,Chia-Ming Uang,Rafael Sabelli
Publisher : McGraw Hill Professional
Release Date : 2011-08-01
Category : Architecture
Total pages :880
GET BOOK

Comprehensive coverage of the background and design requirements for plastic and seismic design of steel structures Thoroughly revised throughout, Ductile Design of Steel Structures, Second Edition, reflects the latest plastic and seismic design provisions and standards from the American Institute of Steel Construction (AISC) and the Canadian Standard Association (CSA). The book covers steel material, cross-section, component, and system response for applications in plastic and seismic design, and provides practical guidance on how to incorporate these principles into structural design. Three new chapters address buckling-restrained braced frame design, steel plate shear wall design, and hysteretic energy dissipating systems and design strategies. Eight other chapters have been extensively revised and expanded, including a chapter presenting the basic seismic design philosophy to determine seismic loads. Self-study problems at the end of each chapter help reinforce the concepts presented. Written by experts in earthquake-resistant design who are active in the development of seismic guidelines, this is an invaluable resource for students and professionals involved in earthquake engineering or other areas related to the analysis and design of steel structures. COVERAGE INCLUDES: Structural steel properties Plastic behavior at the cross-section level Concepts, methods, and applications of plastic analysis Building code seismic design philosophy Design of moment-resisting frames Design of concentrically braced frames Design of eccentrically braced frames Design of steel energy dissipating systems Stability and rotation capacity of steel beams

Analysis and Design of Steel and Composite Structures

Analysis and Design of Steel and Composite Structures
Author : Qing Quan Liang
Publisher : CRC Press
Release Date : 2018-10-08
Category : Technology & Engineering
Total pages :458
GET BOOK

Steel and composite steel–concrete structures are widely used in modern bridges, buildings, sport stadia, towers, and offshore structures. Analysis and Design of Steel and Composite Structures offers a comprehensive introduction to the analysis and design of both steel and composite structures. It describes the fundamental behavior of steel and composite members and structures, as well as the current design criteria and procedures given in Australian standards AS/NZS 1170, AS 4100, AS 2327.1, Eurocode 4, and AISC-LRFD specifications. Featuring numerous step-by-step examples that clearly illustrate the detailed analysis and design of steel and composite members and connections, this practical and easy-to-understand text: Covers plates, members, connections, beams, frames, slabs, columns, and beam-columns Considers bending, axial load, compression, tension, and design for strength and serviceability Incorporates the author’s latest research on composite members Analysis and Design of Steel and Composite Structures is an essential course textbook on steel and composite structures for undergraduate and graduate students of structural and civil engineering, and an indispensable resource for practising structural and civil engineers and academic researchers. It provides a sound understanding of the behavior of structural members and systems.

Design of Steel Structures

Design of Steel Structures
Author : Luís Simões da Silva,Rui Simões,Helena Gervasio
Publisher : John Wiley & Sons
Release Date : 2012-01-09
Category : Technology & Engineering
Total pages :462
GET BOOK

This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The theoretical basis and checking procedures are closely tied to the Eurocode requirements. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will facilitate the acceptance of the code and provide for a smooth transition from earlier national codes to the Eurocode.

Design of Steel Structures

Design of Steel Structures
Author : Duggal S K
Publisher : Tata McGraw-Hill Education
Release Date : 2000
Category : Building, Iron and steel
Total pages :821
GET BOOK

Plastic Methods for Steel and Concrete Structures

Plastic Methods for Steel and Concrete Structures
Author : Stuart S. J. Moy
Publisher : Macmillan International Higher Education
Release Date : 1996-11-11
Category : Building
Total pages :271
GET BOOK

This is a completely revised, updated and reset edition of the text that appeared with the same title during the 1980s. It covers the requirements of the most recent design standards (BS5950, BS8110 and the Eurocodes) and will appeal to undergraduate and postgraduate students of civil and structural engineering and to practising engineers. Plastic behaviour and the methods for calculating the collapse load of steel structures are discussed and examined in detail. An explanation of the effects of deflections, instability and imperfections on the collapse of structures is followed by a description of the design methods for steel structures. The application of plastic methods to concrete structures and the yield line and strip methods for slabs are also presented. The coverage of both steel and concrete in the same volume is a unique feature of this text which will appeal to many readers. Throughout the book, the emphasis is on applications to modern analysis and design. Each chapter provides the background theory, followed by a series of carefully graded examples with many diagrams that illustrate application of the theory; the chapter concludes with a brief summary which is followed by a wide range of problems (with answers).

Plastic Design and Second-Order Analysis of Steel Frames

Plastic Design and Second-Order Analysis of Steel Frames
Author : W.F. Chen,I. Sohal
Publisher : Springer
Release Date : 2013-12-20
Category : Technology & Engineering
Total pages :509
GET BOOK

Plastic Design of Steel Frames assesses the current status and future direction of computer-based analyses of inelastic strength and stability for direct frame design. It shows how design rules are used in practical frame design and provides an introduction to the second-order theory of inelastic frame design. The book includes two computer programs on a diskette: one for the first-order analyses and the other for the second-order plastic hinge analysis of planar frame design. The second-order program can be used to predict realistic strengths and stabilities of planar frames, thereby eliminating the tedious task of estimating factors for individual member capacity checks. Both programs include clear input instructions. The diskette also contains the Fortran source-code listing for the second-order plastic-hinge analysis, enabling the user to customize the program. The programs will run on an IBM PC-AT or equivalent machine with 640 kB of memory and 30 MB hard drive.

Design Of Steel Structure 3E

Design Of Steel Structure 3E
Author : Duggal
Publisher : Tata McGraw-Hill Education
Release Date : 2009
Category : Building, Iron and steel
Total pages :839
GET BOOK

Design and Analysis of Connections in Steel Structures

Design and Analysis of Connections in Steel Structures
Author : Alfredo Boracchini
Publisher : John Wiley & Sons
Release Date : 2018-07-09
Category : Technology & Engineering
Total pages :352
GET BOOK

The book introduces all the aspects needed for the safe and economic design and analysis of connections using bolted joints in steel structures. This is not treated according to any specific standard but making comparison among the different norms and methodologies used in the engineering practice, e.g. Eurocode, AISC, DIN, BS. Several examples are solved and illustrated in detail, giving the reader all the tools necessary to tackle also complex connection design problems. The book is introductory but also very helpful to advanced and specialist audiences because it covers a large variety of practice demands for connection design. Parts that are not taken to an advanced level are seismic design, welds, interaction with other materials (concrete, wood), and cold formed connections./p

Advanced Analysis and Design of Steel Frames

Advanced Analysis and Design of Steel Frames
Author : Gou-Qiang Li,Jin-Jin Li
Publisher : John Wiley & Sons
Release Date : 2007-06-13
Category : Technology & Engineering
Total pages :392
GET BOOK

Steel frames are used in many commercial high-rise buildings, as well as industrial structures, such as ore mines and oilrigs. Enabling construction of ever lighter and safer structures, steel frames have become an important topic for engineers. This book, split into two parts covering advanced analysis and advanced design of steel frames, guides the reader from a broad array of frame elements through to advanced design methods such as deterministic, reliability, and system reliability design approaches. This book connects reliability evaluation of structural systems to advanced analysis of steel frames, and ensures that the steel frame design described is founded on system reliability. Important features of the this book include: fundamental equations governing the elastic and elasto-plastic equilibrium of beam, sheer-beam, column, joint-panel, and brace elements for steel frames; analysis of elastic buckling, elasto-plastic capacity and earthquake-excited behaviour of steel frames; background knowledge of more precise analysis and safer design of steel frames against gravity and wind, as well as key discussions on seismic analysis. theoretical treatments, followed by numerous examples and applications; a review of the evolution of structural design approaches, and reliability-based advanced analysis, followed by the methods and procedures for how to establish practical design formula. Advanced Design and Analysis of Steel Frames provides students, researchers, and engineers with an integrated examination of this core civil and structural engineering topic. The logical treatment of both advanced analysis followed by advanced design makes this an invaluable reference tool, comprising of reviews, methods, procedures, examples, and applications of steel frames in one complete volume.

Plastic Design of Steel Frames

Plastic Design of Steel Frames
Author : Lynn S. Beedle
Publisher : John Wiley & Sons
Release Date : 1958
Category : Análisis plástico (Teoría de las estructuras)
Total pages :406
GET BOOK

Design of Steel Structures (Vol. 2)

Design of Steel Structures (Vol. 2)
Author : Ramchandra,V. Gehlot
Publisher : Scientific Publishers
Release Date : 2015-02-01
Category : Technology & Engineering
Total pages :972
GET BOOK

Eight edition of this book is based on Bridge Rules (Adopted in 1941, Revised in 1964 and Reprinted in 1989), and IS: 800-2007. Authors have distributed present text in the edition in thirty two chapters [that is, in Four parts (1) Steel Bridges and Influence Lines Diagrams for axial forces for the members of different types of truss-girders, (2) Special Steel Structures (3) Analysis of Structures specially, the method of tension co-efficients for determinate and indeterminate structures, (4) Aluminium structures. In order to emphasize that similar to various other subjects, this subject is also very vast. Therefore, space steel structures and stressed-skin steel structures have been described special features of this new-edition of this book may be mentioned as under (1) Historical development of different types of steel bridges details of some spans of longest spans of various types of steel bridges, (2) Design of Guyed Steel Chimneys (3) Instantaneous Centre of Rotation (ICR) and Plastic Analysis of Pitched slope (i.e., gable structure) and influences of axial forces and shear forces on the plastic moment of resistance of the member cross-sections.

Plastic Design of Steel Structures

Plastic Design of Steel Structures
Author : Augustín Mrázik,Miroslav Škaloud,Miloslav Tocháček
Publisher : Unknown
Release Date : 1987
Category : Building, Iron and steel
Total pages :637
GET BOOK