December 3, 2020

Download Ebook Free Thermal Stresses And Temperature Control Of Mass Concrete

Thermal Stresses and Temperature Control of Mass Concrete

Thermal Stresses and Temperature Control of Mass Concrete
Author : Zhu Bofang
Publisher : Butterworth-Heinemann
Release Date : 2013-12-11
Category : Technology & Engineering
Total pages :518
GET BOOK

Methods of controlling mass concrete temperatures range from relatively simple to complex and from inexpensive too costly. Depending on a particular situation, it may be advantageous to use one or more methods over others. Based on the author’s 50 years of personal experience in designing mass concrete structures, Thermal Stresses and Temperature Control of Mass Concrete provides a clear and rigorous guide to selecting the right techniques to meet project-specific and financial needs. New techniques such as long time superficial thermal insulation, comprehensive temperature control, and MgO self-expansive concrete are introduced. Methods for calculating the temperature field and thermal stresses in dams, docks, tunnels, and concrete blocks and beams on elastic foundations Thermal stress computations that take into account the influences of all factors and simulate the process of construction Analytical methods for determining thermal and mechanical properties of concrete Formulas for determining water temperature in reservoirs and temperature loading of arched dams New numerical monitoring methods for mass and semi-mature aged concrete

Prevention of Thermal Cracking in Concrete at Early Ages

Prevention of Thermal Cracking in Concrete at Early Ages
Author : R. Springenschmid
Publisher : CRC Press
Release Date : 1998-10-01
Category : Architecture
Total pages :368
GET BOOK

An important new report from the RILEM Technical Committee 119. This book presents models and methods to determine thermal stresses and cracking risks in concrete. The possible influences on and causes of thermal cracking of concrete are discussed and cases of practical measures for avoiding cracking are detailed.

Thermal Cracking in Concrete at Early Ages

Thermal Cracking in Concrete at Early Ages
Author : R. Springenschmid
Publisher : CRC Press
Release Date : 1994-10-13
Category : Architecture
Total pages :960
GET BOOK

Restraint and intrinsic stresses in concrete at early ages are vitally important for concrete structures which must remain free of water-permeable cracks, such as water-retaining structures, tunnel linings, locks and dams. The development of hydration heat, stiffness and strength, also the degree of restraint and, especially for high-strength concrete, non-thermal effects, are decisive for sensitivity to cracking. Determining thses stresses in the laboratory and in construction components has led to a clearer understanding of how they develop and how to optimize mix design, temperature and curing conditions. New testing equipment has enabled the effects of all the important parameters to be qualified and more reliable models for predictiong restraint stresses to be developed. Thermal Cracking in Conrete at Early Ages contains 56 contributions by leading international specialists presented at the RILEM Symposium held in October 1994 at the Technical University of Munich. It will be valuable for construction and site engineers, concrete technologists and scientists.

Thermal Cracking of Massive Concrete Structures

Thermal Cracking of Massive Concrete Structures
Author : Eduardo M.R. Fairbairn,Miguel Azenha
Publisher : Springer
Release Date : 2018-05-23
Category : Technology & Engineering
Total pages :409
GET BOOK

This book provides a State of the Art Report (STAR) produced by RILEM Technical Committee 254-CMS ‘Thermal Cracking of Mas-sive Concrete Structures’. Several recent developments related to the old problem of understanding/predicting stresses originated from the evolution of the hydration of concrete are at the origin of the creation this technical committee. Having identified a lack in the organization of up-to-date scientific and technological knowledge about cracking induced by hydration heat effects, this STAR aims to provide both practitioners and scientists with a deep integrated overview of consolidated knowledge, together with recent developments on this subject.

The Finite Element Method

The Finite Element Method
Author : Zhu
Publisher : John Wiley & Sons
Release Date : 2018-03-12
Category : Mathematics
Total pages :872
GET BOOK

A comprehensive review of the Finite Element Method (FEM), this book provides the fundamentals together with a wide range of applications in civil, mechanical and aeronautical engineering. It addresses both the theoretical and numerical implementation aspects of the FEM, providing examples in several important topics such as solid mechanics, fluid mechanics and heat transfer, appealing to a wide range of engineering disciplines. Written by a renowned author and academician with the Chinese Academy of Engineering, The Finite Element Method would appeal to researchers looking to understand how the fundamentals of the FEM can be applied in other disciplines. Researchers and graduate students studying hydraulic, mechanical and civil engineering will find it a practical reference text.

Advanced Materials, Mechanical and Structural Engineering

Advanced Materials, Mechanical and Structural Engineering
Author : Seung Hong,Junwon Seo,Kihoon Moon
Publisher : CRC Press
Release Date : 2016-04-14
Category : Science
Total pages :410
GET BOOK

In the last decades, advanced materials and mechanics has become a hot topic in engineering. Recent trends show that the application of nanotechnology and environmental science together with advanced materials and mechanics are playing an increasingly important role in engineering applications. For catching up with this current trend, this boo

New Developments in Dam Engineering

New Developments in Dam Engineering
Author : Martin Wieland,Qingwen Ren,John S.Y. Tan
Publisher : CRC Press
Release Date : 2014-05-14
Category : Technology & Engineering
Total pages :1240
GET BOOK

The development of water resources is a key element in the socio-economic development of many regions in the world. Water availability and rainfall are unequally distributed both in space and time, so dams play a vital role, there being few viable alternatives for storing water. Dams hold a prime place in satisfying the ever-increasing demand for power, irrigation and drinking water, for protection of man, property and environment from catastrophic floods, and for regulating the flow of rivers. Dams have contributed to the development of civilization for over 2,000 years. Worldwide there are some 45,000 large dams listed by ICOLD, which have a height over 15 meters. Today, in western countries, where most of the water resources have been developed, the safety of the existing dams and measures for extending their economical life are of prime concern. In developing countries the focus is on the construction of new dams. The proceedings of the 4th International Conference on Dam Engineering includes contributions from 18 countries, and provides an overview of the state-of-the-art in hydropower development, new type dams, new materials and new technologies, dam and environment. Traditional areas, such as concrete dams and embankment dams, methods of analysis and design of dams, dam foundation, seismic analysis, design and safety, stability of dam and slope, dam safety monitoring and instrumentation, dam maintenance, and rehabilitation and heightening are also considered. The book is of special interest to scientists, researchers, engineers, and students working in dam engineering, dam design, hydropower development, environmental engineering, and structural hydraulics.

Building Materials and Structural Engineering II

Building Materials and Structural Engineering II
Author : B. Xu,H.Y. Li
Publisher : Trans Tech Publications Ltd
Release Date : 2013-08-30
Category : Technology & Engineering
Total pages :276
GET BOOK

Volume is indexed by Thomson Reuters CPCI-S (WoS). Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Building Materials and Structural Engineering (BMSE2013), May 24-25, 2013, Beijing, China. The 54 papers are grouped as follows: Chapter 1: Research on Building Engineering and Building Materials; Chapter 2: Structures Engineering; Chapter 3: Research on Applied Materials; Chapter 4: Related Topics.

Mechanical Engineering, Industrial Electronics and Information Technology Applications in Industry

Mechanical Engineering, Industrial Electronics and Information Technology Applications in Industry
Author : B.L. Liu,Ming Hai Yuan,Guo Rong Chen,Jun Peng
Publisher : Trans Tech Publications Ltd
Release Date : 2013-09-27
Category : Technology & Engineering
Total pages :3094
GET BOOK

Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Mechanical Engineering, Industrial Electronics and Informatization (MEIEI 2013), September 14-15, 2013, Chongqing, China. The 656 papers are grouped as follows: Chapter 1: Applied Mechanics and Advances in Mechanical Engineering; Chapter 2: Industrial Electronics, Measurements, Automation and Control Technology; Chapter 3: Signal and Data Processing, Data Mining, Applied and Computational Mathematics; Chapter 4: Information Technology Applications in Industry and Engineering.

Chemical Engineering and Material Properties

Chemical Engineering and Material Properties
Author : H.M. Zhang,B. Wu
Publisher : Trans Tech Publications Ltd
Release Date : 2011-12-08
Category : Technology & Engineering
Total pages :1600
GET BOOK

Volume is indexed by Thomson Reuters CPCI-S (WoS). The 2011 International Symposium on Chemical Engineering and Material Properties (ISCEMP 2011) was a premier forum for the presentation of technological advances and research results in the fields of chemical engineering and material properties. ISCEMP 2011 brought together leading engineers and scientists, working in chemical engineering and material properties, from around the world. The present peer-reviewed papers were selected on the basis of originality, technical quality and research content.

Advanced Construction Technologies

Advanced Construction Technologies
Author : Husain Abbas,Kiang Hwee Tan
Publisher : Trans Tech Publications Ltd
Release Date : 2014-04-17
Category : Technology & Engineering
Total pages :2326
GET BOOK

Volume is indexed by Thomson Reuters CPCI-S (WoS). Collection of selected, peer reviewed papers from the 2014 International Conference on Structures and Building Materials (ICSBM 2014), March 15-16, 2014, Guangzhou, China. The 431 papers are grouped as follows: Chapter 1: Structural Engineering, Chapter 2: Monitoring and Control of Structures, Chapter 3: Structural Rehabilitation, Retrofitting and Strengthening, Chapter 4: Reliability and Durability of Structures, Chapter 5: Disaster Prevention and Mitigation, Chapter 6: Bridge Engineering, Chapter 7: Geotechnical and Geological Engineering, Chapter 8: Tunnel, Subway and Underground Facilities, Chapter 9: Seismic Engineering, Chapter 10: Roads, Railway Engineering and Traffic Engineering, Chapter 11: Hydrology, Coastal and Hydraulic Engineering, Chapter 12: Computational Mechanics and Mathematical Modeling, Chapter 13: Construction Technology, Chapter 14: Project Management and Engineering Management, Chapter 15: Architectural Design and Its Theory, Chapter 16: Urban Planning and Design, Chapter 17: Landscape Planning and Design, Chapter 18: Architectural Environment, Eco-Building and Green Building, Chapter 19: Building Energy Saving Technology, Chapter 20: Construction Materials Research, Chapter 21: Materials Science, Chapter 22: Data and Signal Processing, Chapter 23: Environmental Engineering and Wastewater Treatment, Chapter 24: Engineering Education

Architecture, Building Materials and Engineering Management

Architecture, Building Materials and Engineering Management
Author : He Tao Hou,Li Tian
Publisher : Trans Tech Publications Ltd
Release Date : 2013-08-08
Category : Technology & Engineering
Total pages :3120
GET BOOK

Collection of selected, peer reviewed papers from the 2013 International Conference on Civil, Architecture and Building Materials, (3rd CEABM2013), May 24-26, 2013, Jinan, China. The 580 papers are grouped as follows: Chapter 1: Architectural Design and its Theory; Chapter 2: Architectural Environment & Equipment Engineering; Chapter 3: Ecological Architecture; Chapter 4: Traditional Construction Materials; Chapter 5: Advanced Construction Materials; Chapter 6: Control of Quality Engineering; Chapter 7: Urban Planning and Design; Chapter 8: Landscape Planning and Design; Chapter 9: Project Management in Building; Chapter 10: Engineering Management and Engineering Education.

Advances in Structures

Advances in Structures
Author : Lijuan Li
Publisher : Trans Tech Publications Ltd
Release Date : 2010-12-06
Category : Technology & Engineering
Total pages :4200
GET BOOK

Volume is indexed by Thomson Reuters CPCI-S (WoS). This monumental five-volume set, comprising 821 peer-reviewed papers, brings together the latest advances in, and applications of, steel, concrete and novel hybrid structures, structural optimization, monitoring and control of structures, reliability and durability of structures, structural rehabilitation, retrofitting and strengthening, structural wind engineering and earthquake engineering, smart structures, etc.

Advances in Civil Engineering and Architecture Innovation

Advances in Civil Engineering and Architecture Innovation
Author : Qing Yang,Li Hua Zhu,Jing Jing He,Zeng Feng Yan,Rui Ren
Publisher : Trans Tech Publications Ltd
Release Date : 2011-10-24
Category : Technology & Engineering
Total pages :4270
GET BOOK

These peer-reviewed papers reflect the valuable experience of the authors in the fields of innovation in structural systems and disaster prevention in engineering structures, architectural innovation, sustainable development of buildings, energy and the environment and innovation in, and applications of, building materials. Hot topics and cutting-edge views related to sustainable development in civil engineering are presented.

Applied Mechanics and Civil Engineering

Applied Mechanics and Civil Engineering
Author : Robert Zhu
Publisher : Trans Tech Publications Ltd
Release Date : 2011-10-27
Category : Technology & Engineering
Total pages :480
GET BOOK

Volume is indexed by Thomson Reuters CPCI-S (WoS). The 77 selected papers on Applied Mechanics and Civil Engineering are divided into the topics of: applied mechanics, civil engineering, hydraulic engineering, environmental engineering and safety, others. The work provides an excellent overview of these topics.