November 27, 2020

Download Ebook Free Transmission Pipeline Calculations And Simulations Manual

Transmission Pipeline Calculations and Simulations Manual

Transmission Pipeline Calculations and Simulations Manual
Author : E. Shashi Menon
Publisher : Gulf Professional Publishing
Release Date : 2014-12-27
Category : Technology & Engineering
Total pages :612
GET BOOK

Transmission Pipeline Calculations and Simulations Manual is a valuable time- and money-saving tool to quickly pinpoint the essential formulae, equations, and calculations needed for transmission pipeline routing and construction decisions. The manual’s three-part treatment starts with gas and petroleum data tables, followed by self-contained chapters concerning applications. Case studies at the end of each chapter provide practical experience for problem solving. Topics in this book include pressure and temperature profile of natural gas pipelines, how to size pipelines for specified flow rate and pressure limitations, and calculating the locations and HP of compressor stations and pumping stations on long distance pipelines. Case studies are based on the author’s personal field experiences Component to system level coverage Save time and money designing pipe routes well Design and verify piping systems before going to the field Increase design accuracy and systems effectiveness

Reliability and Maintainability of In-Service Pipelines

Reliability and Maintainability of In-Service Pipelines
Author : Mojtaba Mahmoodian
Publisher : Gulf Professional Publishing
Release Date : 2018-06-13
Category : Science
Total pages :186
GET BOOK

Reliability and Maintainability of In-Service Pipelines helps engineers understand the best structural analysis methods and more accurately predict the life of their pipeline assets. Expanded to cover real case studies from oil and gas, sewer and water pipes, this reference also explains inline inspection and how the practice influences reliability analysis, along with various reliability models beyond the well-known Monte Carlo method. Encompassing both numerical and analytical methods in structural reliability analysis, this book gives engineers a stronger point of reference covering both pipeline maintenance and monitoring techniques in a single resource. Provides tactics on cost-effective pipeline integrity management decisions and strategy for a variety of different pipes Presents readers with rational tools for strengthening and rehabing existing pipelines Teaches how to optimize materials selection and design parameters for designing future pipelines with a longer service life

Progress in Differential-Algebraic Equations II

Progress in Differential-Algebraic Equations II
Author : Timo Reis,Sara Grundel,Sebastian Schöps
Publisher : Springer Nature
Release Date : 2020-10-10
Category : Mathematics
Total pages :486
GET BOOK

This book contains articles presented at the 9th Workshop on Differential-Algebraic Equations held in Paderborn, Germany, from 17–20 March 2019. The workshop brought together more than 40 mathematicians and engineers from various fields, such as numerical and functional analysis, control theory, mechanics and electromagnetic field theory. The participants focussed on the theoretical and numerical treatment of “descriptor” systems, i.e., differential-algebraic equations (DAEs). The book contains 14 contributions and is organized into four parts: mathematical analysis, numerics and model order reduction, control as well as applications. It is a useful resource for applied mathematicians with interest in recent developments in the field of differential algebraic equations but also for engineers, in particular those interested in modelling of constraint mechanical systems, thermal networks or electric circuits.

Design and Modeling of Mechanical Systems - IV

Design and Modeling of Mechanical Systems - IV
Author : Nizar Aifaoui,Zouhaier Affi,Mohamed Slim Abbes,Lassad Walha,Mohamed Haddar,Lotfi Romdhane,Abdelmajid Benamara,Mnaouar Chouchane,Fakher Chaari
Publisher : Springer Nature
Release Date : 2020-02-26
Category : Technology & Engineering
Total pages :961
GET BOOK

This book offers a collection of original peer-reviewed contributions presented at the 8th International Congress on Design and Modeling of Mechanical Systems (CMSM’2019), held in Hammamet, Tunisia, from the 18th to the 20th of March 2019. It reports on research, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, these proceedings offers a broad overview of the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2019 was jointly organized by two leading Tunisian research laboratories: the Mechanical Engineering Laboratory of the National Engineering School of Monastir, University of Monastir and the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax, University of Sfax.

Design and Modeling of Mechanical Systems—III

Design and Modeling of Mechanical Systems—III
Author : Mohamed Haddar,Fakher Chaari,Abdelmajid Benamara,Mnaouar Chouchane,Chafik Karra,Nizar Aifaoui
Publisher : Springer
Release Date : 2017-11-25
Category : Technology & Engineering
Total pages :1262
GET BOOK

This book offers a collection of original peer-reviewed contributions presented at the 7th International Congress on Design and Modeling of Mechanical Systems (CMSM’2017), held in Hammamet, Tunisia, from the 27th to the 29th of March 2017. It reports on both research findings, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, this proceedings offers a broad overview on the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2017 was jointly organized by two leading Tunisian research laboratories: the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax and the Mechanical Engineering Laboratory of the National Engineering School of Monastir..

Pipeline Planning and Construction Field Manual

Pipeline Planning and Construction Field Manual
Author : E. Shashi Menon
Publisher : Gulf Professional Publishing
Release Date : 1978-06-26
Category : Technology & Engineering
Total pages :576
GET BOOK

Pipeline Planning and Construction Field Manual aims to guide engineers and technicians in the processes of planning, designing, and construction of a pipeline system, as well as to provide the necessary tools for cost estimations, specifications, and field maintenance. The text includes understandable pipeline schematics, tables, and DIY checklists. This source is a collaborative work of a team of experts with over 180 years of combined experience throughout the United States and other countries in pipeline planning and construction. Comprised of 21 chapters, the book walks readers through the steps of pipeline construction and management. The comprehensive guide that this source provides enables engineers and technicians to manage routine auditing of technical work output relative to technical input and established expectations and standards, and to assess and estimate the work, including design integrity and product requirements, from its research to completion. Design, piping, civil, mechanical, petroleum, chemical, project production and project reservoir engineers, including novices and students, will find this book invaluable for their engineering practices. Back-of-the envelope calculations Checklists for maintenance operations Checklists for environmental compliance Simulations, modeling tools and equipment design Guide for pump and pumping station placement

Gas Pipeline Hydraulics

Gas Pipeline Hydraulics
Author : E. Shashi Menon
Publisher : CRC Press
Release Date : 2005-05-24
Category : Technology & Engineering
Total pages :416
GET BOOK

In your day-to-day planning, design, operation, and optimization of pipelines, wading through complex formulas and theories is not the way to get the job done. Gas Pipeline Hydraulics acts as a quick-reference guide to formulas, codes, and standards encountered in the gas industry. Based on the author's 30 years of experience in manufacturing and the oil and gas industry, the book presents a step-by-step introduction to the concepts in a practical approach illustrated by real-world examples, case studies, and a wealth of problems at the end of each chapter. Avoiding overly complex equations and theorems, Gas Pipeline Hydraulics demonstrates the calculation of pressure drop using various commonly accepted formulas. The author extends this discussion to determine total pressure required under various configurations, the necessity of pressure regulators and control valves, the comparative pros and cons of adding compressor stations versus pipe loops, mechanical strength of the pipeline, and thermal hydraulic analysis. He also introduces transient pressure analysis along with references for more in-depth study. The text concludes with the economic aspects of pipeline systems. Containing valuable appendices that provide conversions from USCS to SI units, tables of properties of natural gas, commonly used pipe sizes, and allowable internal and hydrotest pressures, this is the most easy-to-use, hands-on reference for gas pipelines available.

Piping Calculations Manual

Piping Calculations Manual
Author : Shashi Menon
Publisher : McGraw-Hill Professional Pub
Release Date : 2005
Category : Technology & Engineering
Total pages :666
GET BOOK

This on-the-job resource is packed with all the formulas, calculations, and practical tips necessary to smoothly move gas or liquids through pipes, assess the feasibility of improving existing pipeline performance, or design new systems. Contents: Water Systems Piping * Fire Protection Piping Systems * Steam Systems Piping * Building Services Piping * Oil Systems Piping * Gas Systems Piping * Process Systems Piping * Cryogenic Systems Piping * Refrigeration Systems Piping * Hazardous Piping Systems * Slurry and Sludge Systems Piping * Wastewater and Stormwater Piping * Plumbing and Piping Systems * Ash Handling Piping Systems * Compressed Air Piping Systems * Compressed Gases and Vacuum Piping Systems * Fuel Gas Distribution Piping Systems

Working Guide to Pump and Pumping Stations

Working Guide to Pump and Pumping Stations
Author : E. Shashi Menon
Publisher : Gulf Professional Publishing
Release Date : 2009-10-21
Category : Technology & Engineering
Total pages :304
GET BOOK

Working Guide to Pumps and Pumping Stations: Calculations and Simulations discusses the application of pumps and pumping stations used in pipelines that transport liquids. It provides an introduction to the basic theory of pumps and how pumps are applied to practical situations using examples of simulations, without extensive mathematical analysis. The book begins with basic concepts such as the types of pumps used in the industry; the properties of liquids; the performance curve; and the Bernoullis equation. It then looks at the factors that affect pump performance and the various methods of calculating pressure loss in piping systems. This is followed by discussions of pump system head curves; applications and economics of centrifugal pumps and pipeline systems; and pump simulation using the software PUMPCALC. In most cases, the theory is explained and followed by solved example problems in both U.S. Customary System (English) and SI (metric) units. Additional practice problems are provided in each chapter as further exercise. This book was designed to be a working guide for engineers and technicians dealing with centrifugal pumps in the water, petroleum, oil, chemical, and process industries. Calculations for their selection, sizing and power output Case studies based on the author’s 35 years of field experience Covers all types of pumps Simplified models and simulations

Oil and Gas Pipelines and Piping Systems

Oil and Gas Pipelines and Piping Systems
Author : Alireza Bahadori
Publisher : Gulf Professional Publishing
Release Date : 2016-09-10
Category : Technology & Engineering
Total pages :660
GET BOOK

Oil and Gas Pipelines and Piping Systems: Design, Construction, Management, and Inspection delivers all the critical aspects needed for oil and gas piping and pipeline condition monitoring and maintenance, along with tactics to minimize costly disruptions within operations. Broken up into two logical parts, the book begins with coverage on pipelines, including essential topics, such as material selection, designing for oil and gas central facilities, tank farms and depots, the construction and installment of transportation pipelines, pipe cleaning, and maintenance checklists. Moving over to piping, information covers piping material selection and designing and construction of plant piping systems, with attention paid to flexibility analysis on piping stress, a must-have component for both refineries with piping and pipeline systems. Heavily illustrated and practical for engineers and managers in oil and gas today, the book supplies the oil and gas industry with a must-have reference for safe and effective pipeline and piping operations. Presents valuable perspectives on pipelines and piping operations specific to the oil and gas industry Provides all the relevant American and European codes and standards, as well as English and Metric units for easier reference Includes numerous visualizations of equipment and operations, with illustrations from various worldwide case studies and locations

Natural Gas Measurement Handbook

Natural Gas Measurement Handbook
Author : James E. Gallagher
Publisher : Elsevier
Release Date : 2013-11-25
Category : Technology & Engineering
Total pages :425
GET BOOK

This information-packed volume covers all aspects of natural gas measurement.

Pipeline Rules of Thumb Handbook

Pipeline Rules of Thumb Handbook
Author : E.W. McAllister
Publisher : Elsevier
Release Date : 2015-08-03
Category : Technology & Engineering
Total pages :704
GET BOOK

Now in its sixth edition, Pipeline Rules of Thumb Handbook has been and continues to be the standard resource for any professional in the pipeline industry. A practical and convenient reference, it provides quick solutions to the everyday pipeline problems that the pipeline engineer, contractor, or designer faces. Pipeline Rules of Thumb Handbook assembles hundreds of shortcuts for pipeline construction, design, and engineering. Workable "how-to" methods, handy formulas, correlations, and curves all come together in this one convenient volume. Save valuable time and effort using the thousands of illustrations, photographs, tables, calculations, and formulas available in an easy to use format Updated and revised with new material on project scoping, plastic pipe data, HDPE pipe data, fiberglass pipe, NEC tables, trenching, and much more A book you will use day to day guiding every step of pipeline design and maintenance

Offshore Pipelines

Offshore Pipelines
Author : Tian Ran Lin, PhD,Boyun Guo,,Shanhong Song, Ph.D.,Ali Ghalambor, PhD,Jacob Chacko
Publisher : Elsevier
Release Date : 2005-04-25
Category : Technology & Engineering
Total pages :304
GET BOOK

Offshore Pipelines covers the full scope of pipeline development from pipeline designing, installing, and testing to operating. It gathers the authors' experiences gained through years of designing, installing, testing, and operating submarine pipelines. The aim is to provide engineers and management personnel a guideline to achieve cost-effective management in their offshore and deepwater pipeline development and operations. The book is organized into three parts. Part I presents design practices used in developing submarine oil and gas pipelines and risers. Contents of this part include selection of pipe size, coating, and insulation. Part II provides guidelines for pipeline installations. It focuses on controlling bending stresses and pipe stability during laying pipelines. Part III deals with problems that occur during pipeline operations. Topics covered include pipeline testing and commissioning, flow assurance engineering, and pigging operations. This book is written primarily for new and experienced engineers and management personnel who work on oil and gas pipelines in offshore and deepwater. It can also be used as a reference for college students of undergraduate and graduate levels in Ocean Engineering, Mechanical Engineering, and Petroleum Engineering. * Pipeline design engineers will learn how to design low-cost pipelines allowing long-term operability and safety. * Pipeline operation engineers and management personnel will learn how to operate their pipeline systems in a cost effective manner. * Deepwater pipelining is a new technology developed in the past ten years and growing quickly.

Piping and Pipeline Calculations Manual

Piping and Pipeline Calculations Manual
Author : Philip Ellenberger
Publisher : Elsevier
Release Date : 2014-01-22
Category : Technology & Engineering
Total pages :412
GET BOOK

Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. Updates to major codes and standards such as ASME B31.1 and B31.12 New methods for calculating stress intensification factor (SIF) and seismic activities Risk-based analysis based on API 579, and B31-G Covers the Pipeline Safety Act and the creation of PhMSA

Oil and Gas Production Handbook: An Introduction to Oil and Gas Production

Oil and Gas Production Handbook: An Introduction to Oil and Gas Production
Author : Havard Devold
Publisher : Lulu.com
Release Date : 2013*
Category : Gas fields
Total pages :82
GET BOOK