April 17, 2021

Download Ebook Free Tribology Of Metal Cutting

Tribology of Metal Cutting

Tribology of Metal Cutting
Author : Viktor P. Astakhov
Publisher : Elsevier
Release Date : 2006-12-18
Category : Technology & Engineering
Total pages :392
GET BOOK

Tribology of Metal Cutting deals with the emerging field of studies known as Metal Cutting Tribology. Tribology is defined as the science and technology of interactive surfaces moving relative each other. It concentrates on contact physics and mechanics of moving interfaces that generally involve energy dissipation. This book summarizes the available information on metal cutting tribology with a critical review of work done in the past. The book covers the complete system of metal cutting testing. In particular, it presents, explains and exemplifies a breakthrough concept of the physical resource of the cutting tool. It also describes the cutting system physical efficiency and its practical assessment via analysis of the energy partition in the cutting system. Specialists in the field of metal cutting will find information on how to apply the major principles of metal cutting tribology, or, in other words, how to make the metal cutting tribology to be useful at various levels of applications. The book discusses other novel concepts and principles in the tribology of metal cutting such as the energy partition in the cutting system; versatile metrics of cutting tool wear; optimal cutting temperature and its use in the optimization of the cutting process; the physical concept of cutting tool resource; and embrittlement action. This book is intended for a broad range of readers such as metal cutting tool, cutting insert, and process designers; manufacturing engineers involved in continuous process improvement; research workers who are active or intend to become active in the field; and senior undergraduate and graduate students of manufacturing. · Introduces the cutting system physical efficiency and its practical assessment via analysis of the energy partition in the cutting system. · Presents, explains and exemplifies a breakthrough concept of the physical resource of the cutting tool. · Covers the complete system of metal cutting testing.

Measurement in Machining and Tribology

Measurement in Machining and Tribology
Author : J. Paulo Davim
Publisher : Springer
Release Date : 2018-12-29
Category : Technology & Engineering
Total pages :154
GET BOOK

This book presents the research advances in the science of measurement, giving special focus to the field of machining and tribology. Topics such as dimensional metrology, precision measurements, industrial metrology, accuracy and precision in measurement are covered. Also theoretical aspects such as modelling and simulation are highlighted.

Metal Cutting Mechanics

Metal Cutting Mechanics
Author : Viktor P. Astakhov
Publisher : CRC Press
Release Date : 1998-12-22
Category : Science
Total pages :320
GET BOOK

Metal Cutting Mechanics outlines the fundamentals of metal cutting analysis, reducing the extent of empirical approaches to the problems as well as bridging the gap between design and manufacture. The author distinguishes his work from other works through these aspects: considering the system engineering of the cutting process identifying the singularity of the cutting process among other closely related manufacturing processes by chip formation, caused by bending and shear stresses in the deformation zone suggesting a distinctive way toward predictability of the metal cutting process devoting special attention to experimental methodology Metal Cutting Mechanics provides an exceptional balance between general reading and research analysis, presenting industrial and academic requirements in terms of basic scientific factors as well as application potential.

Tribology in Manufacturing Technology

Tribology in Manufacturing Technology
Author : J. Paulo Davim
Publisher : Springer Science & Business Media
Release Date : 2012-09-14
Category : Technology & Engineering
Total pages :198
GET BOOK

This book aims to show how tribological concepts can be applied in order to improve manufacturing technology in modern industry. It can be used as a guide book for engineering students or a reference useful for academics in the fields of tribology, manufacturing, materials and mechanical engineering.

Industrial Tribology

Industrial Tribology
Author : M.H. Jones,D. Scott
Publisher : Elsevier
Release Date : 1983-03-01
Category : Technology & Engineering
Total pages :515
GET BOOK

Industrial Tribology

Advanced Machining Processes of Metallic Materials

Advanced Machining Processes of Metallic Materials
Author : Wit Grzesik
Publisher : Elsevier
Release Date : 2016-11-15
Category : Technology & Engineering
Total pages :608
GET BOOK

Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity

Mechanical Tribology

Mechanical Tribology
Author : George E. Totten,Hong Liang
Publisher : CRC Press
Release Date : 2004-04-22
Category : Technology & Engineering
Total pages :508
GET BOOK

Studying the morphology, defects, and wear behavior of a variety of material surfaces, Mechanical Tribology examines popular and emerging surface characterization techniques for assessment of the physical, mechanical, and chemical properties of various modified surfaces, thin films, and coatings. Its chapters explore a wide range of tribolo

Encyclopedia of Tribology

Encyclopedia of Tribology
Author : C. Kajdas,E. Wilusz,S. Harvey
Publisher : Elsevier
Release Date : 1990-10-09
Category : Technology & Engineering
Total pages :477
GET BOOK

The multidisciplinary nature of tribology, the conflicting theories and approaches to it found in the literature, plus the fact that definitions of the same phenomenon often differ widely, prompted the authors to compile this work. The aim of this encyclopedia is to provide information on specific tribological terms. The entire field of tribology encompassing lubrication, friction and wear, i.e. the science and technology of interacting surfaces in relative motion, is covered. An extensive description of the chemical and biological aspects of tribology is given, including a wide range of current references and authors. The reader is also referred to relevant literature for most of the terms listed. The information presented has been made as up-to-date as possible, taking into account both the theoretical and practical nature of the subject. The encyclopedia will be an indispensable reference source in the work of engineers, chemists, physicists, metallurgists, materials and surface scientists, biotechnologists, as well as research workers in these fields.

Tribology for Scientists and Engineers

Tribology for Scientists and Engineers
Author : Pradeep L. Menezes,Michael Nosonovsky,Sudeep P. Ingole,Satish V. Kailas,Michael R. Lovell
Publisher : Springer Science & Business Media
Release Date : 2013-12-04
Category : Technology & Engineering
Total pages :948
GET BOOK

This book describes available tribology technologies and introdces a comprehensive overview of tribology. General, up-to-date knowledge on how tribology is approached in various related areas of research, both experimental and computational is provided.

Metal Cutting Principles

Metal Cutting Principles
Author : Milton Clayton Shaw
Publisher : Mit Press
Release Date : 1960
Category : Technology & Engineering
Total pages :478
GET BOOK

Toward developing a rational basis for the metal cutting process. From the introduction: The economic importance of the cutting process may be appreciated by the single observation that nearly every device in use in our complex society has one or more machined surfaces or holes. There are several reasons for developing a rational approach to the cutting problem: 1. To improve cutting techniques--even minor improvements are of major importance in high volume production. 2. To produce products of greater precision and of greater useful life. 3. To increase the rate of production and produce a greater number and variety of products with the tools available. In this treatment of the subject we will consider the cutting process in fundamental terms. The objective is to explain a number of commonly observed results rather than to present a large mass of empirical constants and a large number of empirical relationships of limited applicability.

Geometry of Single-point Turning Tools and Drills

Geometry of Single-point Turning Tools and Drills
Author : Viktor P. Astakhov
Publisher : Springer Science & Business Media
Release Date : 2010-07-29
Category : Technology & Engineering
Total pages :565
GET BOOK

Geometry of Single-Point Turning Tools and Drills outlines clear objectives of cutting tool geometry selection and optimization, using multiple examples to provide a thorough explanation. It addresses several urgent problems that many present-day tool manufacturers, tool application specialists, and tool users, are facing. It is both a practical guide, offering useful, practical suggestions for the solution of common problems, and a useful reference on the most important aspects of cutting tool design, application, and troubleshooting practices. Covering emerging trends in cutting tool design, cutting tool geometry, machining regimes, and optimization of machining operations, Geometry of Single-Point Turning Tools and Drills is an indispensable source of information for tool designers, manufacturing engineers, research workers, and students.

Tribology in Manufacturing Processes and Joining by Plastic Deformation II

Tribology in Manufacturing Processes and Joining by Plastic Deformation II
Author : Niels Bay,Chris V Nielsen
Publisher : Trans Tech Publications Ltd
Release Date : 2018-04-24
Category : Technology & Engineering
Total pages :490
GET BOOK

8th International Conference on Tribology in Manufacturing Processes and Joining by Plastic Deformation (ICTMP2018) Selected, peer reviewed papers from the 8th International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation, June 24-26, 2018, Elsinore, Denmark

Machining Difficult-to-Cut Materials

Machining Difficult-to-Cut Materials
Author : Hossam A. Kishawy,Ali Hosseini
Publisher : Springer
Release Date : 2018-08-09
Category : Technology & Engineering
Total pages :243
GET BOOK

This book focus on the challenges faced by cutting materials with superior mechanical and chemical characteristics, such as hardened steels, titanium alloys, super alloys, ceramics and metal matrix composites. Aspects such as costs and appropriate machining strategy are mentioned. The authors present the characteristics of the materials difficult to cut and comment on appropriate cutting tools for their machining. This book also serves as a reference tool for manufacturers working in industry.

Metal Machining

Metal Machining
Author : K. Maekawa,T. Obikawa,Y. Yamane,T.H.C. Childs
Publisher : Butterworth-Heinemann
Release Date : 2013-10-22
Category : Technology & Engineering
Total pages :408
GET BOOK

Metal machining is the most widespread metal-shaping process in the mechanical manufacturing industry. World-wide investment in metal machining tools increases year on year - and the wealth of nations can be judged by it. This text - the most up-to-date in the field - provides in-depth discussion of the theory and application of metal machining at an advanced level. It begins with an overview of the development of metal machining and its role in the current industrial environment and continues with a discussion of the theory and practice of machining. The underlying mechanics are analysed in detail and there are extensive chapters examining applications through a discussion of simulation and process control. "Metal Machining: Theory and Applications" is essential reading for senior undergraduates and postgraduates specialising in cutting technology. It is also an invaluable reference tool for professional engineers. Professors Childs, Maekawa, Obikawa and Yamane are four of the leading authorities on metal machining and have worked together for many years. Of interest to all mechanical, manufacturing and materials engineers Theoretical and practical problems addressed

Tribological Aspects in Manufacturing

Tribological Aspects in Manufacturing
Author : American Society of Mechanical Engineers. Winter Annual Meeting
Publisher : Amer Society of Mechanical
Release Date : 1991
Category : Metal-work
Total pages :327
GET BOOK